Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Hawker Beechcraft C90A/GT/GTi 190-00664-02 Rev. B
84
Annunciations & Alerts
Flight
Instruments
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
FeaturesAnnun/AlertsAppendixIndex
MISCELLANEOUS MESSAGE ADVISORIES (CONT.)
Message Comments
DB CHANGE – Database changed.
Verify stored airways.
This occurs when a stored flight plan contains
an airway that is no longer consistent with
the aviation database. This alert is issued only
after an aviation database update. Verify use
of airways in stored flight plans and reload
airways as needed.
LOCKED FPL – Cannot navigate
locked flight plan.
This occurs when the pilot attempts to activate
a stored flight plan that contains locked
waypoint. Remove locked waypoint from flight
plan. Update flight plan with current waypoint.
WPT ARRIVAL – Arriving at
waypoint -[xxxx]
Arriving at waypoint [xxxx], where [xxxx] is the
waypoint name.
STEEP TURN – Steep turn ahead. A steep turn is 15 seconds ahead. Prepare to
turn.
INSIDE ARSPC – Inside airspace. The aircraft is inside the airspace.
ARSPC AHEAD – Airspace ahead
less than 10 minutes.
Special use airspace is ahead of aircraft. The
aircraft will penetrate the airspace within 10
minutes.
ARSPC NEAR – Airspace near and
ahead.
Special use airspace is near and ahead of the
aircraft position.
ARSPC NEAR – Airspace near – less
than 2 nm.
Special use airspace is within 2 nm of the
aircraft position.
APR INACTV – Approach is not
active.
The system notifies the pilot that the loaded
approach is not active. Activate approach when
required.
SLCT FREQ – Select appropriate
frequency for approach.
The system notifies the pilot to load the
approach frequency for the appropriate NAV
receiver. Select the correct frequency for the
approach.
SLCT NAV – Select NAV on CDI for
approach.
The system notifies the pilot to set the CDI to
the correct NAV receiver. Set the CDI to the
correct NAV receiver.