Pilot's Guide

190-009663-02 Rev. B Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT/GTi 107
AUDIO PANEL AND CNS
AUTO-TUNING THE COM FREQUENCY
Tune COM frequencies from the following:
•NearestAirportsWindow(PFD)
•WPT–AirportInformationPage
•NRST–NearestAirportsPage
•NRST–NearestFrequenciesPage(ARTCC,FSS,WX)
•NRST–NearestAirspacesPage
AUTO-TUNING FROM THE PFD
TuneCOMfrequenciesforthenearestairportsfromtheNearestAirportsWindowonthePFD.Whenthe
desired frequency is entered, it becomes a standby frequency. Pressing the Frequency Transfer Key places
thisfrequencyintotheCOMActiveFrequencyField.
Auto-tuning a COM frequency for a nearby airport from the PFD:
1) Select the NRST Softkey on the PFD to open the Nearest Airports Window. A list of 25 nearest airport identifiers
and COM frequencies is displayed.
2) Turn the FMS Knob to scroll through the list and highlight the desired COM frequency.
3) Press the ENT Key to load the COM frequency into the COM Standby Frequency Field of the selected COM
radio.
4) Press the Frequency Transfer Key to transfer the frequency to the COM Active Frequency Field.
Figure 4-8 Nearest Airports Window (PFD)
Select the
NRST
Softkey to Open
the Nearest
Airports Window