Pilot's Guide

190-009663-02 Rev. B Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT/GTi 115
AUDIO PANEL AND CNS
SELECTING THE RADIO TO BE TUNED
Press the small NAVKnobtotransferthefrequencytuningselectionandtheFrequencyTransferArrow
betweentheupperandlowerradiofrequencyelds.
Figure 4-20 Switching NAV Tuning Boxes
Press the NAV Knob to Switch
the tuning selection from one
NAV Radio to the other
VOR/LOC ID
When the MorsecodeIdentieraudioisonforaNAVradio,awhiteIDappearstotheleftoftheactive
NAVfrequency.
Intheexampleshown,inordertolistentoeitherstationidentier,presstheNAV1 or NAV2 Key on the
Audio Panel. Pressing the VOL/ID Knob turns off the Morse code audio only in the radio selected for tuning
(lightbluenumbers).ToturnoffbothNAVIDs,transferthetuningselectionbetweenNAV1andNAV2with
the small NAV Knob and press the VOL/ID Knob again to turn the Morse code off in the other radio.
Figure 4-21 NAV Radio ID Indication
The Morse Code Identifier
for the TOP VOR is On
Station
Identifier
VOLUME
AdjustNAVRadiovolumelevelfrom0to100%usingthe VOL/ID Knob. Turning the knob clockwise
increases volume, counterclockwise decreases volume.
Whenadjusting,thelevelisdisplayedinplaceofthestandbyfrequencies.Volumelevelindicationremains
for two seconds after the change.
Figure 4-22 NAV Volume Level
NAV Volume Level
Remains for Two
Seconds