Owner's Manual

nüvi 610/660/670 Owner’s Manual 61
aPPendix
Problem/Question
Solution/Answer
How do I know my nüvi is in
USB Mass Storage Mode?
When your nüvi is in USB Mass Storage Mode,
a picture of a nüvi connected to a computer is
shown on the nüvi. Also, you should see a new
removable disk drive listed in My Computer.
My computer never senses
that the nüvi is connected.
1. Unplug the USB cable from your computer.
2. Turn the nüvi off and then back on again.
3. Plug the USB cable into your computer.
The nüvi automatically goes into USB
Mass Storage Mode.
The nüvi cannot communicate with Windows
®
95,
Windows 98, or Windows Me.
I cannot nd any drives
named “nüvi” in my list of
drives.
Try the solution listed above.
If you have several network drives mapped
on your computer, Windows may have trouble
assigning drive letters to your nüvi drives. Follow
the steps on the following page to assign your
drive letters.
I keep getting a message
saying “Unsafe Removal of
Device” when I unplug the
USB cable.
To disconnect your nüvi from your computer,
double-click the Unplug or Eject icon in your
system tray. Select “USB Mass Storage Device,”
and click Stop. Select the nüvi drives, and click
OK. Disconnect your nüvi from your computer.