quick start manual nüvi 880 ® personal travel assistant with MSN® Direct
© 2008 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Tel. (913) 397.8200 or (800) 800.1020 Fax (913) 397.8282 Garmin (Europe) Ltd. Garmin Corporation Liberty House No. 68, Jangshu 2nd Road, Hounsdown Business Park, Shijr, Taipei County, Taiwan Southampton, Hampshire, SO40 Tel. 886/2.2642.9199 9RB UK Fax 886/2.2642.9099 Tel. +44 (0) 870.8501241 (outside the UK) 0808 2380000 (within the UK) Fax +44 (0) 870.8501251 All rights reserved.
Your nüvi Unit See the Important Safety and Product Information guide in the product box for product warnings and other important information. Battery cover Power key: slide to the left to turn the unit on/off; slide to the right to lock the screen Microphone Headphone/ audio out jack GPS antenna MicroSD card slot Microphone Serial number under battery new Mini-USB connector External antenna connector Speakers Warning: This product contains a lithium-ion battery.
Step 1: Install the Battery Step 2: Mount the nüvi 1. Locate the rectangular lithium-ion battery that came in the product box. 2. Slide the battery cover off the back of the nüvi. 3. Locate the metal contacts on the end of the lithium-ion battery. 4. Insert the battery so the metal contacts on the battery match up with the metal contacts inside the battery compartment. 1. Plug the Cradle vehicle power Power cable into the cable power connector on the right side of the cradle. 2.
Step 3: Assemble and Mount the Speech Recognition Remote Control Step 4: Configure the nüvi To turn on your nüvi, slide the Power key to the left and let go after one second. Follow the on-screen instructions. 1. Insert the round lithium coin CR2032 battery into the remote control with the positive side facing up. 2. Align the Arrow on arrow on the battery cover battery cover Battery cover with the arrow Arrow on on the outer outer edge of edge of the remote remote. Battery 3.
Step 6: Activate Your MSN® Direct Receiver 5. Within two days, complete the following steps: • Connect the vehicle power cable, and turn the key to ON/ACC. • Make sure you are in an MSN Direct coverage area (see http://garmin .msndirect.com/coverage).� • Touch Tools > MSN Direct. If the Subscription Inactive page appears, verify that one signal bar is green.
Understanding the Menu Page ➊ ➋ ➌ ➎ Finding an Address 1. Select Where to? > Address. 2. Select Change State/Province, if necessary. 3. Select Search All. OR Select Spell City, enter the city/postal code, and select Done. Select the city/postal code in the list. (Not all locations can be found using postal code searching.) 4. Enter the number of the address, and select Done. 5. Enter the street name, and select Done. Select the correct street in the list, if necessary. 6.
Taking a Detour Walking to a Destination 1. With a route active, select Menu. 2. Select Detour. If you are walking to your destination, use Pedestrian mode to optimize your route for walking. Select Tools > Settings > System > Usage Mode > Pedestrian > OK. If the current route is the only reasonable option, the nüvi might not calculate a detour. You can also select specific detours while navigating a route by using the Prompted Detour feature. Select Tools > Settings > Navigation > Prompted Detour.
Viewing the Main Pages Select View map to open the Map page. The vehicle icon shows your current location. Touch and drag the map to view a different area of the map. Touch the text bar to open the Turn List page. Touch to zoom out. Touch Select Menu to return to the Menu page. Select Arrival or Speed to open the Trip Computer page. to zoom in. To save your current location, touch the vehicle icon.
Using Photo Navigation Using MSN® Direct Panoramio provides photos that contain location information called geotags. You can load these photos onto your nüvi or MicroSD card and navigate to them. See http://connect.garmin.com/photos and your owner’s manual for more information. The MSN Direct receiver and nüvi must be in range of an MSN Direct coverage area. See http://garmin.msndirect.com/coverage for more information on coverage areas.
The Map page displays when there is a traffic delay on your route. The number represents the number of minutes the traffic will delay your route. The delay time has been automatically calculated into the arrival time. To view the details of the delays, touch . If there is more than one delay, touch Details. Touch Avoid to avoid this delay. MSN® Direct Menu To view MSN Direct content, from the Menu page, touch Tools > MSN Direct. Touch a category to view information for it.
Using Speech Recognition Voice Commands Use the speech recognition feature to speak to your nüvi to find destinations, select options, and perform other functions. The speech recognition feature does not work for all languages in all areas. See the owner’s manual at www.garmin.com for more information. 1. Press the large button on the remote. 2. Wait for the green speak icon to appear. 3. Speak a command.
You can also say Find Nearest to search a location category. Location categories are Point of Interest categories contained in the nüvi. The Find Nearest command only works from the Menu page, Where to? page, and Map page. To speak shortcut commands: 1. Speak any shortcut command from the Shortcut Commands table. You can use shortcut commands from any screen. 2. Listen for the voice prompt before speaking your next command.
To speak the name of a popular place: 1. Speak Find Place by Name from any screen. 4. Speak Yes to navigate to the place, or speak No to go back to the list of found places. “Find Place by Name” “Yes” 2. Listen for the voice prompt, and speak the name of the place. The nüvi repeats the name of the place as it is searching. To speak an address: 1. Speak Find Address from any screen. 2. Respond to the prompts to speak or spell the city name, house number, and street.
More Information Pairing Your Phone 1. Verify that your phone is compatible with the nüvi (www.garmin.com/bluetooth). 2. From the Menu page, select Tools > Settings > Bluetooth > Add. 3 Select Add. 4. Enable the Bluetooth component of your phone and enable Find Me/Discoverable/ Visible mode. These settings might be in a Bluetooth menu, Connections menu, or Hands-free menu. 5. Select OK on the nüvi. For more information about your nüvi, select Tools > Help.
For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www.garmin.com. © 2008 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd. Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9RB UK Garmin Corporation No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan www.garmin.com Part Number 190-00847-02 Rev.