nüvi 465 ® quick start manual
Look at Your nüvi Use Your nüvi ➊ ➋ S ee the Important Safety and Product Information guide in the product box for product warnings and other important information. Mini-USB connector Speaker Power key: Slide to the left to turn the nüvi on/off; slide to the right to lock the screen. SD card slot Microphone Warning: This product contains a lithium-ion battery. To prevent damage, remove the unit from the vehicle when exiting or store it out of direct sunlight.
Set Up Your nüvi Attach the Adhesive Disk and the Mounting Base to Your Dashboard 5. Snap the cradle onto the mounting arm. Cradle Mounting arm caution: The permanent adhesive disk is extremely difficult to remove. 1. Clean and dry the area where you want to place the mounting base. 2. Select the adhesive disk you want to use, and remove one side of the backing. Permanent Disk 3. Place the adhesive disk on the bottom of the mounting base, and remove the other side of the backing. 4.
Mount Your nüvi 1. Plug the vehicle power cable into the back of your nüvi. 2. Fit the bottom of your nüvi into the cradle. 3. Tilt your nüvi back until it snaps into place. 4. Plug the other end of the vehicle power cable into a power outlet in your vehicle. Your unit should turn on automatically if it is plugged in and the vehicle is running. 5.
Follow Your Route Your route is marked with a magenta line. As you travel, your nüvi guides you to your destination with voice prompts, arrows on the map, and directions at the top of the map. If you depart from the original route, your nüvi recalculates the route and provides new directions. Touch and drag the map to view a different area of the map. A speed limit icon could appear as you travel on major roadways. ➊ ➋ ➍ ➎ ➏ ➊ ➋ Touch to view the Turn List page. ➌ Touch to view the Where Am I? page.
Add a Stop 1. With a route active, touch Menu > Where To?. 2. Search for the extra stop. 3. Touch Go!. 4. Touch Add as a Stop to add this stop before your final destination. tip: To add more than one stop, touch Where To? > Routes. Select the current route, and touch Add or Remove Points. Route to Next Stop If you have multiple stops on your route, you can stop navigating to the current stop and start navigating to the next stop. 1. With a route active, touch Menu > Route. 2. Touch Next Stop. 3.
When you receive traffic information, a traffic icon appears in the top left corner of the Map page. The traffic icon changes color to indicate the severity of traffic conditions on your route or the road you are currently traveling. View Offers In North America, you could receive location-relevant offers and coupons. Touch the offer on the screen to search for the nearest location related to that offer. See your owner’s manual for more information.
Charge Your nüvi • Connect the vehicle power cable. • Connect a USB cable. • Connect an AC adapter (optional accessory). Reset Your nüvi 1. Slide the Power key to the left and hold it for 8 seconds. 2. Turn on the nüvi. Secure Your nüvi 1. Ensure that you are at your security location and that your nüvi is receiving satellite signals. 2. Touch Tools > Settings > Security. 3. Touch the button below Garmin Lock. 4. Enter a four-digit PIN. 5. Touch Set.