User's Guide

Garmin Pilot for iOS User’s Guide
190-01501-00 Rev. N
118
File
OverviewPlanFileFlySubscriptionsAppendicesIndex
Trips can be cloned and/or deleted on the Trip Planning Page. Cloning a trip copies
the current trip. Any changes made after the clone is created are not copied. Trips
can also be deleted by swiping left on the trip title in the Trips List. The selected trip
(highlighted in blue) can not be deleted. Cloned trips are saved to the Trips List. All
trip data is cloned including pilot information, aircraft information, route of flight and
all other associated data. Trips that have been cloned are available for use at a future
date. Activate a cloned trip, change the date and all applicable data, refresh the
briefing, and the trip is ready to be filed.
PREPARING TO FILE
NOTE: Prior to filing the flight plan, ensure that all of the information entered on the
Trip Planning Page is correct including the route of flight.
Garmin Pilot provides a quick and easy method to file, close, amend or cancel flight
plans. When Garmin Pilot is connected to a DUATS account, route of flight, pilot
information, aircraft information, type of flight plan (IFR/VFR), number of persons
onboard, fuel onboard, date, estimated time of departure (ETD), altitude, airspeed,
and any optional data including alternate, call sign, second in command (SIC), and
remarks are transmitted to DUATS. The flight plan details are then delivered to the
responsible Flight Service Station (FSS) 1 hour prior to the ETD. The ETD must be at
least 30 minutes in the future or the flight plan will not be transmitted. To file a flight
plan with a departure time less than 30 minutes in the future you must call the FSS.
Creating an Active Flight Plan:
1) From any page touch Home > Flight Plan.
2) Touch within the Routing field to activate the cursor.
3) Use the keyboard to insert waypoints. Separate each waypoint with a
space.
Or:
1) Touch the Add Waypoint button.
2) Use the keyboard to input the waypoint identifier and touch the return key.
Or :
Use the keyboard to begin entering the waypoint identifier and touch the
desired waypoint from the FastFind List.