Instruction manual

400W Series 190-01226-04 Rev. 2
Instructions for Continued Airworthiness Bell 206B Page 4 of 22
2. INSTRUCTIONS FOR CONTINUED AIRWORTHINESS
2.1 Introduction
Content, Scope, Purpose and Arrangement: This document identifies the Instructions for
Continued Airworthiness for the modification of the
rotorcraft by installation of the Garmin 400W Series
GPS/WAAS Nav/Com units.
Applicability: Applies to Bell models 206B rotorcraft altered by
installation of the Garmin 400W Series GPS/WAAS
Nav/Com units.
Definition of Abbreviations: See Section 1.5
Precautions: None
Units of measurement: None
Referenced publications: Garmin 005-00610-03 Rev. 1 “Equipment List
400W/500W Series Installation Bell 206B STC” or
later FAA Approved Revisions
Garmin 190-01226-02 Rev. 1 “400W Series
Rotorcraft STC Installation Manual” or later FAA
Approved Revisions
Additional Maintenance Data: Garmin 190-01226-07 Rev. 3 “400W/500W Series
Installation Bell 206B” or later FAA Approved
Revisions
Garmin 005-W0223-00 Rev. 3 “400W/500W Series
Harness Assembly Bell 206B” or later FAA
Approved Revisions
Retention: This document, or the information contained within,
will be included in the rotorcraft’s permanent
records.