Instruction Manual

Step One: Install U-bolt and
Rod Eye Bracket.
Install the Rod eye Bracket (item 2) by
using the U-Bolt (item 16), split wash-
ers (item 14) and the nuts as seen in
Figures 1 & 2.
Use Loctite on threads
to keep the nuts from vibrating loose.
Note: Push the rod eye bracket up so
it touches the diagonal gussets, and
the U-bolt goes above the ridge. You
may also cut the excess threads off
with a hack saw if preferred.
Cylinder & Bracket Installation
Figure 1
Figure 2
4