Instruction manual

Step One: Install U-bolt and
Rod Eye Bracket.
Install the Rod eye Bracket (item 2) by
using the U-Bolt (item 16), split wash-
ers (item 14) and the nuts as seen in
Figures 1, 1-a & 2. Note the location of
the U-Bolt in Figure 1-a.
Use Loctite
on threads to keep the nuts from
vibrating loose.
Note: You may cut the excess threads
off with a hack saw if preferred.
Cylinder Mounting Installation
Figure 1
Figure 2
4
Figure 1-a