zūmo 660 ® quick start manual 1
Your zūmo Power button: Press and hold to turn the zūmo on/off. Press quickly to adjust the volume and the backlight brightness. Headphone/ audio-out jack (under weather cap) Mini-USB connector GPS antenna Memory card slot Speaker Microphone External antenna connector (under weather cap) Battery contacts Release key: Slide and release to open the battery cover Note: See the zūmo 660 Installation Instructions in the product box for motorcycle and automobile mounting instructions.
Installing the Battery 1. Locate the lithium‑ion battery that came in the product box. 2. Slide the release key until the battery cover on the back of the zūmo pops up. 3. Locate the metal contacts on the end of the lithium‑ion battery. 4. Insert the battery so that the metal contacts on the battery match with the metal contacts inside the battery compartment. 5. Replace battery cover. Ways to Charge Your zūmo Battery • • • • Use the automotive power cable. Use the USB cable.
Finding Points of Interest 1. Touch Where To? > Points of Interest. 2. Select a category and a subcategory. 3. Select a destination, and touch Go!. To enter letters contained in the name, touch Where To? > Points of Interest > Spell Name. To search for a location in a different area, touch Where To? > Near. Following Your Route Your route is marked with a magenta line. As you travel, your zūmo guides you to your destination with voice prompts, arrows on the map, and directions at the top of the map.
Navigating Off Road Enabling Fuel Tracking Using Hands-free Calling 1. Touch Tools > Settings > Navigation. 2. Under Route Preference, touch Off Road. In the Trip Computer page, touch Tools > Settings > Fuel Gauge. To pair and connect, your device and the zūmo must be within 10 meters of each other and turned on. The zūmo can be connected to a phone and a headset at the same time. When you choose a destination while the off road feature is enabled, the zūmo plots a straight line to the destination.
Pairing the zūmo with Your Mobile Phone 1. Touch Menu > Tools > Settings > Bluetooth. 2. Under Bluetooth, touch Enabled. 3. On the Menu page, touch Tools > Settings > Bluetooth. 4. Under Phone, touch Add (or Change). 5. Enable the Bluetooth component on your phone. Enable Find Me/Discoverable/ Visible mode. These settings might be in a Bluetooth, Connections, or Hands-free menu. 6. Touch OK on the zūmo. 7. Select your phone, and touch OK. 8. Enter 1234 into your phone.
Listening to MP3 Files Product Registration Contact Garmin Locking Your zūmo More Information In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000. 1. 2. 3. 4. 5. Touch Tools > Media Player. Touch Source to open the MP3 player. Touch Browse. Touch a category. Touch Play All. 1. Touch Tools > Settings > Security. 2. Touch the button below Garmin Lock. 3. Enter a 4-digit PIN and drive to a security location.
Garmin®, the Garmin logo, and zūmo® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. Garmin Lock™ and nüMaps Guarantee™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such name by Garmin is under license. RDS-TMC Traffic Information Services France © ViaMichelin 2006.
