User's Manual

GARNET GAE-3020
8
router. There is no installation of software on the PC for this, except for the
normal Ethernet LAN adapter installation.
The modem configuration can be viewed and modified through the console
which is accessible through the RS-232 serial connection. To use the serial
interface, a straight-through cable is needed between the modem and a terminal
(could be a PC running a terminal emulation package).
The PHY can be configured to attempt the layer 1 connection in one of the
following modes:
•
••
• T1.413
•
••
• G.Lite
•
••
• G.dmt
This is configured by setting the BUN attribute AdslMode with the following
console command:
bun set port atm/adslmode <mode>
Where acceptable value of <mode> are, t1413, glite, gdmt.
Protocol Configuration for configuring the modem for this mode of operation.