Garnet ADSL Modem PCI GAN-1030 User’s Guide ver 3.3 All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Garnet Systems Co., Ltd. All specifications are subject to change without notice.
FCC NOTICE THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITION: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED OPERATION. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Contents CHAPTER 1. OVERVIEW 1.1 INTRODUCTION ............................................................................................................................... 2 1.2 FEATURES ....................................................................................................................................... 2 1.3 SPECIFICATIONS ............................................................................................................................ 2 CHPATER 2. INSTALLATION 2.
GARNET GAN-1030 Chapter 1. Overview 1.1 Introduction Garnet ADSL(Asymmetric Digital Subscriber Line) Modem GAN-1030 is an internal PC card(PCI) that provides users faster connectivity than conventional access technologies by offering up to 8 Mbps of downstream line rate and up to 640 Kbps of upstream over existing phone lines, which is asymmetric. It also provides interoperability and industry standards and protocols. Garnet ADSL Modem supports either G.992.1(G.dmt) or Splitterless G.992.2(G.
GARNET GAN-1030 Power Consumption: 5.35W Frequency Range : 0.11~1.1MHz(Down) / 30KHz~110KHz(Up) Modulation : DMT (Discrete Multi Tone) Data Rates : Downstream : Max. 8Mbps Upstream : Max. 640Kbps Interface : PCI Specification 2.
GARNET GAN-1030 CPE CO Internet ADSL Modem Modem DSLAM 4
GARNET GAN-1030 Chapter 2. Installation 2.1 Before Installation Please be advised that if you do not yet subscribe phone service, it is impossible to get ADSL service. In this case, please contact your local service provider to have new telephone service. And please be informed that telephone service providers do not service all ADSL applications. Please contact your local Central Office on the applications and ADSL service providers may support different service protocols.
GARNET GAN-1030 ☞ Following materials are provided in the package. A. Garnet ADSL Modem GAN-1030 B. Driver CD C. RJ 11 cable D. User’s Guide ☞ A micro filter is built in the modem. If you have two or more phones in one phone m line, one or more Micro filters are needed to prevent signal disturbance. To purchase micro filters, please contact your service provider. ☞
GARNET GAN-1030 Telephone PC with ADSL Modem M d Internet Telephone Micro filter PSTN 2.3 ADSL Modem Installation EXchange 2.3 GAN-1030 PCI Card Installation 1. Turn off your computer and all attached peripheral devices (printer, monitor, etc.) and unplug them from the electrical outlet. L CAUTION : To avoid risk of electric shock, make sure your computer and all peripheral devices are turned off and unplugged. 2. Remove the cover of your computer.
GARNET GAN-1030 6. Carefully replace the computer cover in accordance with the instructions in your system's user's guide. 7. There are two modular telephone jacks on the bracket of the modem which connect the modem to a telephone line and to a telephone handset (optional: for users subscribed both ADSL and telephone service only). Make the cable connections between the modem and the telephone line in the following order.
GARNET GAN-1030 2.4 Windows 98 SE Software Installation ☞ NOTE: This procedure describes the installation of Garnet ADSL Modem on a new system. If you are reloading or upgrading a current installation, the existing Garnet drivers and supporting software should first be uninstalled. Window 98 SE will detect the Garnet hardware as three logical devices: PCI System Peripheral, and PCI ADSL LAN Adapter.
GARNET GAN-1030 1. Add New Hardware Wizard will automatically pop up. Click next. 2. Click Search for the best driver.. and click Next to proceed.
GARNET GAN-1030 3. Insert installation driver CD and click Browse and select the directory according to the service protocol available by the ADSL service provider and O/S in your computer system. 4. Correct driver program is found. Click Next in this picture.
GARNET GAN-1030 5. Click Finish in this picture. Windows will direct next steps. 6. Windows is searching for the driver installation program required by the device. 7. Please insert Windows 98 CD in the CDRom drive in this picture.
GARNET GAN-1030 8. Click OK in this picture. 9. Windows is copying files from CDRom. Wait until all files are copied and driver program installation is finished. 10. When the driver installation program is properly installed, as shown in the picture, the green quadrangle icon will popped up on the system tray. Double click the icon.
GARNET GAN-1030 11. The picture proves that the driver program is prperly installed and working for the ADSL PCI Modem. Close the picture. 2.5 Running the Garnet ADSL Manager Program 1. Click My Computer and Control Panel.
GARNET GAN-1030 2. You can find the Garnet ADSL Manager program icon in the picture. Double click the icon.
GARNET GAN-1030 3. The program shows how the Garnet ADSL Modem is managed, data transmission speed and Driver program version. Click OK. Chapter 3.
GARNET GAN-1030 3.1 Uninstalling in the Windows 98 1. Click My Computer and Control Panel. 2. Click Install/Uninstall tab and select GAN-1030 ADSL PCI NIC.
GARNET GAN-1030 3. Windows will ask, before you remove the Driver installation program. 4. To be sure to make all files are completely removed from the system, click OK in this picture. 5. Click OK in this picture. 6. Click OK in this picture.
GARNET GAN-1030 7. You can find the Driver Installation Program is completely removed. Close the Windows and reboot your computer to be sure to remove the Driver Installation Program.
GARNET GAN-1030 Chapter 4. Appendix 4.1 Trouble-shooting ☞ You would better know Modem Name, Modem No., Serial No. and what is the problem, and then ask help to your Service Provider in order to get solutions. Q. In installing modem in Windows 95/98, Plug-n-Play Dialog box is not showing. A. PC does not recognize ADSL modem. In this case; 1. Modem card is most probably not securely fit into one of your PCI expansion slot or some alienated materials may be smeared in the metal edge.
GARNET GAN-1030 A. Contact your local service provider.
