Instruction Manual

3. Attach CS bracket(s) to the

pole mount ﬁxture

You can attach one or two charging station(s) to both

the single (EPPFS) and the double (EPPFD) pole mount

ﬁxture. The double version (EPPFD) is recomended for

daisychaining (when several CS & poles are installed

using the same power cable)

3.1 Attach a CS bracket to the single

(EPPFS) pole mount ﬁxture

4 Nm

Note: A second CS can be installed on the back of the

mounting plate of the pole mount ﬁxture. In that case the

long screws must be used.

3.2 Attach two CS brackets to the double

(EPPFD) pole mount ﬁxture

Note: Only remove the water protection plate when

you attach two CS on the pole attachment.

4 Nm

Note: Thread the cables through CS bracket (A) before

you attach the bracket to the pole mount ﬁxture and CS

bracket (B).