® Visit garrett.com for more information ® ACE 150/250 Owner’s Manual Speed your recoveries with the Garrett PRO-POINTER II or the PRO-POINTER AT 1881 W. State Street Garland, Texas 75042 Tel: 1.972.494.6151 Email: sales@garrett.com Fax: 1.972.494.1881 © 2015 Garrett Electronics, Inc. PN 1526100.
THANK YOU FOR CHOOSING GARRETT METAL DETECTORS! Thank you for choosing a Garrett Metal Detectors’ ACE™ series detector. This enhanced metal detector has all the depth and technology, including Garrett’s exclusive Target ID technology you need to make your treasure hunting adventures exciting and very rewarding. All of our products are backed by 50 years of extensive research and development that ensures your ACE detector is the most advanced of its kind in the industry.
TABLE OF CONTENTS ACE Parts................................................................................5 ACE Assembly.........................................................................6 ACE Features and Controls ���������������������������������������������������8 ACE 150.............................................................................8 ACE 250..........................................................................
ACE ILLUSTRATION ACE PARTS Searchcoil Lower Stem Upper Stem Control Housing LCD Screen Knob Threaded Bolt Washer Spring Clip Pushbutton Controls S-shaped Ramrod Stem Handle Grip Detector Stand 4 Garrett Metal Detectors No tools are required to assemble the ACE 250 or 150 enhanced metal detectors. Four (4) AA batteries are included with the detector.
ACE ASSEMBLY 5. Depress the spring clip in the lower stem to adjust to the most comfortable operating length. 1. Align the holes in the mounting washers with the small posts on the stem and press firmly into the lower stem. 6. Wrap the searchcoil snugly about the stem with the first turn of the cable over the stem. 1. 2. 2. Slide the searchcoil onto the stem. 3. Insert the threaded bolt through the holes of the lower stem and searchcoil.
ACE 150 FEATURES The ACE 150 is designed with Garrett’s exclusive Graphic Target ID technology, which indicates the probable identification of a target along a horizontal scale that reads from low conductive metals (e.g. iron) on the left to high conductive metals (e.g. U.S. coins) on the right. 3. Upper Scale—The Upper Scale, where the Target ID cursor is illuminated when a target is detected, consists of five (5) graphical segments. 4.
housing. Remove batteries from the ACE when the unit will be stored for longer than 30 days. 8. Headphone Jack—Any 1/4” plug headphones can be inserted into the jack found on the reverse side of the Control Housing. 9. Tone ID—The Tone ID feature produces distinct audible tones based on a target’s conductivity: • High conductivity targets (such as U.S. coins) produce a unique belltone signal.
3. MODE Pushbutton—Push the MODE button to select one of three desired detection Modes: • ACE 250 KEY FEATURES All-Metal Mode—This MODE is designed to detect every type of metal and should be used when you want to find all metal items or when the materials of the desired object is unknown. Switch to the All-Metal Mode to aid in locating a target when its signal is inconsistent. (Inconsistent signals can mean a trash target is close to a good target).
4. Sensitivity—The ACE 250 has eight (8) Sensitivity settings for more precise depth and target detection. 5. Battery Condition Indicator—An LCD display continuously illuminated to indicate the battery level. is The ELIM function can be used to modify each Mode’s discrimination pattern. For example, when an unwanted target is located while hunting, press the ELIM button to eliminate that Notch (delete the cursor) to eliminate that specific target. See illustration below.
side to side and front to back at the lowest constant height to locate the area causing the loudest signal. Watch the bar graphs on the LCD Screen to also see the peak signal area. With practice at pinpointing, you will be able to pinpoint objects very quickly. 4. Five MODE options—Like the ACE 150, the ACE 250 has All-Metal, Jewelry and Coins modes. The ACE 250, however, has two additional modes: Custom and Relics. • CUSTOM Mode—This Mode can be programmed by the operator.
HUNTING WITH YOUR ACE DETECTOR • If you’re new to treasure hunting start searching in sandy areas, such as those found near playgrounds or on the beach. These sandy and loose gravel areas make it easier to learn how to use your metal detector to pinpoint and dig targets. • Hunt in your own yard and around playground lawns once you’re familiar with your new metal detector. These areas give you an opportunity to test your pinpointing and digging practices in manicured lawns.
DIGGING A TARGET To retrieve your treasure in a grassy area: 1. Cut a C-shaped half circle in the ground about 3 to 4 inches deep where you’ve pinpointed your target. 2. Gently fold the grass plug onto a handkerchief or similar type cloth. 3. Retrieve your target from the hole or use a probe to further investigate its location. If the target is deeper place the excess soil on top of the folded plug. 4. Replace the loose soil and fold the plug back into the ground.
CODE OF ETHICS CAUTION The following is a Code of Ethics that many treasure hunt clubs endorse and hobbyists follow to preserve our exciting hobby of metal detecting. We encourage you to do the same: When searching for treasure with your Garrett detector, observe these precautions: • I will keep informed on and obey all laws, regulations and rules governing federal, state and local public lands. • Never trespass or hunt on private property without permission.
BENCH TESTS CARING FOR YOUR ACE DETECTOR Your Garrett detector is a rugged machine, designed for outdoor use. However, as with all electronic equipment there are some simple ways you can care for your detector to maintain its high performance. • Avoid extreme temperatures as much as possible, such as storing the detector in an automobile trunk during the summer or outdoors in sub-freezing weather. • Keep your detector clean. Wipe the control housing with a damp cloth when necessary.
ACE WARRANTY & SERVICE Your ACE detector is warranted for 24 months, limited parts and labor, but does not cover damage caused by alteration, modification, neglect, accident or misuse. In the event you encounter problems with your ACE detector please read through this Owner’s Manual carefully to ensure the detector is not inoperable due to manual adjustments. On the ACE 250, press and hold the POWER Pushbutton for 10 seconds to return the recommended factory settings.
ACE ACCESSORIES Garrett offers a complete line of accessories that will increase your success and enjoyment of treasure hunting with your new detector. These accessory products are available from your local or dealer or by calling the Garrett factory at 1-800527-4011. ACE™ Tote Sport Bag— Part No. 1651500 This rugged and durable ACE series tote bag is 18” in diameter and is made of durable nylon mesh to easily store all ACE series detectors (when disassembled) and accessories.
Garrett™ ClearSound Easy Stow Headphones— Part No. 1612700 These sleek headphones feature padded ear cups, rotating ear pieces for flat storage, in-line volume control and a 41" (104 cm) coiled cord which extends to 82" (208 cm). These 1/4” adapter headphones mask out external noise for greater audio signal clarity. Garrett PRO-POINTER®II Pinpointing Detector— Part No.
32 Garrett Metal Detectors
