Quick Start Guide

Z-Lynk Wireless Operation

Axiom features a built-in Z-Lynk wireless transmitter

which can be used with Garrett MS-3 wireless

headphones and any Z-Lynk enabled devices (such as

any other headphones connected to a Z-Lynk receiver).

A Z-Lynk Wireless headphone icon (see illustration)

on the LCD indicates the current status of your wireless

connection. A steady icon indicates the detector is

paired with an operating Z-Lynk receiver that is within

range. A flashing icon indicates that the detector is

searching for a receiver. Absence of the icon indicates

that Axiom’s wireless transmitter is switched off.

Pairing: To pair with a new set of headphones/

receiver, simply switch the headphone/receiver on,

hold within 2 feet (0.6 meters) of the Axiom. Next,

power on Axiom. Repeatedly press the MENU button

until the wireless icon is highlighted (as indicated

in this illustration). Press the (+) button to pair the

headphones.

Once paired, if the headphone/receiver is switched

off or moved out of range, Axiom will search and

attempt to reconnect to the receiver for 5 minutes,

indicated by a flashing icon. If the connection is not

reestablished during this time, Axiom will switch off its

wireless transmitter. To reconnect, simply switch the

Axiom off and then on again.

To unpair (forget) a set of headphones, simply press

the MENU button to select the wireless icon and then

use the (-) button to unpair.

Use of optional wired headphones: Axiom can

also be operated with any wired headphones that

have a 1/4” plug. For headphones with an 1/8” plug, an

optional adaptor is available from Garrett.

Note: Packages shipped with MS-3 headphones

include a user’s guide for full details on wireless

headphone operation.

Press MENU until the wireless icon is selected. Use Plus (+)

or Minus (-) button to pair or unpair headphones.