Quick Start Guide

Controls

1. Power ON/OFF and OPERATE—Hold for one

second to turn power ON or OFF. Press and hold

for ve seconds to restore Factory Settings. Tap to

exit MENU settings.

2. VOLUME Plus/Minus buttons—Use to increase

or decrease detector volume.

3. SENSITIVITY Plus/Minus buttons—Use to

increase or decrease Sensitivity setting. While

adjusting MENU settings, these Plus/Minus

buttons are also used to alter detector settings.

4. MENU/Iron Check— Repeatedly press to scroll

through menu items, then press the Plus (+) or

Minus (-) buttons directly above the Menu button

to change setting. Press and hold this button to

utilize the Iron Check function (see page 21).

5. THRESHOLD Plus/Minus—Use to increase or

decrease the background audio hum that is

added to the target response.

6. Ground Balance—Hold the GND BAL button

while bouncing coil above the ground until

ground response disappears or becomes as small

as possible.

4 5

Note: Use the Plus (+) or Minus (-) above the Menu button to adjust any of the Menu options. Axiom automatically exits the

Menu settings after 20 seconds with no activity; or, simply press the OPERATE button at any time to exit the Menu.