User manual

DETECTOR ASSEMBLY

Garrett Metal Detectors

ACE 200i

™

ACE 200i CONTENTS

If any part is missing, please contact Garrett Customer Service.

Nut, bolt,

mounting washers

Batteries

installed

Control housing with

S-shaped stem

Searchcoil

Upper, lower

stem (connected)

Warranty card

Manual

Loosen lower camlock and extend lower stem. Insert mounting

washers, connect searchcoil to stem as shown, and hand-

tighten wing nut.

Loosen upper camlock, insert S-stem with control housing,

adjust lower stem to comfortable length, and hand-tighten

the camlocks. Wrap cable snugly around the stem with the

first turn of the cable over the stem.

Note: The arm cuff can be

adjusted by removing the screw

on the bottom and moving it to

the other hole.