User manual

Allows the operator to scroll through the following menu items to permit making manual
adjustments for personal preferences:
In both Discriminate and All-Metal mode:
• Sensitivity (Depth)
• Threshold (Audio Level)
• Frequency
• Volume
• Tone
• Search Image
• Talk (Voice)
• Battery Indicator
• Back Light
In Discriminate mode only:
• 5 Modes—Coins, Jewelry, Relics, Zero, Custom
• Surface Elimination
• Salt Elimination
• Belltone Audio
• Bi-Level Audio
In All-Metal mode only:
• Manual Ground Balance
• Auto Track
All- Metal (FAST TRACK):
This touchpad serves a dual function. When pressed and released, it places the detector in
the All Metal Mode. When pressed and held firmly, the second function, the Fast Track
Ground Balancing function is activated when the All-Metal mode is in use.
Accept/Reject:
This functions in the Motion Discriminate modes only. Permits acceptance or rejection of
specific targets to establish discrimination notches as shown on the lower scale.
Treasure Imaging (PINPOINT – DEPTH):
Press and hold to activate the pinpointing function of the detector when a target has been
discovered. This function operates in either mode and causes the depth of coin-sized targets
to be displayed on the lower scale. Signal strength is indicated on the upper scale and size
and depth of the target is shown on the Imaging Grid. A complete discussion of pinpointing can
be found in the Operating Instructions section of these instructions.
OPERATE:
Press to return to the hunting mode after any change or adjustment of controls.