User manual

Discriminate (Last Mode):
Returns the detector to the last previously used operating mode when operating in the
Discriminate mode.
When hunting in the All-Metal mode, activates the Discriminate mode that was last being used.
Treasure Talk:
Permits Treasure Talk on demand when a target is detected. Pressing this pad will cause the
voice to give the Upper Scale ID number, size and depth of the target last detected.
+ and -
• Permits alternation between the 5 operating modes;
• Permits adjustment of levels of Sensitivity (Depth), Threshold, Frequency, Volume, Tone,
and Talk in the Discriminate and All-Metal modes. Surface Elimination in the Discriminate
mode; and Auto Track in the All-Metal mode.
• Activates (+) or turns off (-) Rechargeable battery gauge, Search Image and Backlight
functions in both modes. Salt Elimination, Belltone, Bi-Level target audio in the Discriminate
mode.
• Moves LCD segments in the upper scale when discrimination is being set in the
Discriminate mode;
• Permits adjustment to be made that achieve precise manual ground balancing in the All-
Metal mode.
Display Screen:
The complete operating status of the detector is shown on the screen at all times. When
Treasure Imaging is pressed and held the size and depth of targets will be shown. The mode
in which you are searching will be shown in the column under Search Mode. Menu, Search,
and Image are shown above the grid in the center to indicate the detector status. Menu is
shown while the detector is being regulated. Search will be illuminated after pressing Operate
and are hunting, and Image when the Treasure Imaging touchpad is pressed and held.
On the second line are detector functions that may be selected and regulated by use of the
Menu/Scroll Touchpad. Under the Search Aids column are listed the various search aids
selected for use.
Treasure Vision:
This function enables the Display Screen to show the status of detected targets.
Control Information
Graphic Display:
1. Target ID Guide
At the top of the control panel coin denominations are listed for use with the Target Cursor
to indicate probable target identification. This is to be used in relationship with the Imaging
Grid to further assist in identifying discovered targets. The five letters (A, B, C, D, E) refer to
the relative sizes on the Imaging Grid.
2. Upper Scale
• Indicates target discovered
• Indicates target strength when Treasure Imaging is pressed.
• Indicates levels of control setting while in the Menu mode.