User manual

Graphic Target Imaging 2500 - 25
Scanning
Swing the searchcoil back and forth in
front of you in a straight line or slight arc
as shown in the photograph below. Keep
the searchcoil at a constant height of one
or two inches above the ground while you
scan at a rate of about one to three feet
per second.
Discovery
Detection of all metal targets will be
indicated by the appearance of a Target
Cursor on the Upper Scale. A cursor will
appear, to indicate every detected target
and will remain for three seconds or until
a new target is detected (whichever comes
first). Desirable targets will also cause an
increase in sound.