User manual

The above illustration shows a cursor at
9+, which would be a quarter if Treasure
Imaging determines it to be a B-size tar-
get. Locate your target by scanning back
and forth over it to determine where sig-
nals are strongest.
Treasure Imaging
Press and hold this touchpad to put your
detector into a Pinpoint mode so that you
can locate your target more precisely and
also determine its relative size which will
be shown on the Imaging Grid. Proper
pinpointing and sizing through use of
TREASURE IMAGING can be an invalu-
able aid to treasure hunting when used
properly.
To turn off your detector: Simply press and
release the POWER touchpad. Operating
battery power is disconnected. Charles
Garrett recommends that you first become
26 - Garrett Metal Detectors