User manual

If the segment below is not showing, press
ACCEPT/REJECT to turn it on. If it is show-
ing, pressing this pad will turn it OFF.
Remember: When you press the ACCEPT
/REJECT touchpad, you cause the dis-
crimination circuit to reject a target that is
shown on corresponding segments of both
the Lower and Upper Scales. This rejec-
tion will be indicated as the Lower Scale
Discrimination Segment disappears.
The same touchpad is used to cause
the detector to accept a target. When
such a desired target is being shown by
the cursor but not the corresponding
Discrimination Segment below, press the
ACCEPT/REJECT touchpad. The segment
will be turned ON and appear, indicating
that your desired target will now cause an
increase in sound.
Note: It is important to remember that
each time the GTI 2500 is turned OFF any
ACCEPT/REJECT selections that you have
made will be retained only in the Custom
mode. ACCEPT/REJECT modifications that
you might have made in the preset Coins,
36 - Garrett Metal Detectors