User manual

Graphic Target Imaging 2500 - 57
TREASURE IMAGING
When you are hunting with the Search
Image aid turned OFF, you will be given
size and depth information only when you
press and hold the TREASURE IMAGING
(Pinpoint) pad. The relative size and depth
of targets will then be indicated on the
Imaging Grid. While this pad is being held,
the 9.5” searchcoil can remain stationary
over your target. Move the coil slightly to
make certain that it is directly over the
target. Targets must pass beneath the
searchcoil, not above it.
IMPORTANT: The searchcoil must be cen-
tered directly over the target to produce
accurate size and depth information about
that target.
Please note that both size and depth
indications of a target can be expected to
change on the grid as the target is being
centered. This is especially evident while
the Search Image aid is being used. Size
and depth indications of targets may then
seem to change erratically, especially as
the searchcoil is being scanned. For most