User Guide

CHAPTER 1 - Overview
Configuration
DX40 Serial Device Router Installation Guide
2
1.2.2 Power and Ground
The DX40 can be ordered with a high (90 -250 VAC or VDC) or low (24-48 VDC) voltage
power supply. The connection point for the power supply is located at the top of the
chassis. The top surface also contains the primary ground stud and labels including serial
number, model number, and power specifications, as illustrated in Figure 1-2.
For detailed power specifications see Table 1-5.
Figure 1-2. Top View
1.2.3 Indicators
The operational status of the ports of the DX40 is indicated by a bank of LEDs on the
beveled corner of the chassis, visible from the front and the side, as illustrated in Figure
1-3.
2-position Terminal Block Power Connection
Ground Connection