ELECTRIC INDUCTION HOB INSTRUCTION FOR INSTALLATION AND USE Model: IH60BF Model: IH30BF Important! Read these instructions for installation and use carefully. Keep these instructions for future reference. Any questions regarding the operation, maintenance service or warranty of the appliance should be directed to GASLAND, please contact us via email at: US market: Junskyamerica@outlook.com AU market: aussiebestsell@outlook.com UK market: campluxuk@outlook.
Safety Warnings Your safety is important to us. Please read this information before using your cooktop. Installation Electrical Shock Hazard • Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance on it. • Connection to a good earth wiring system is essential and mandatory. • Alterations to the domestic wiring system must only be made by a qualified electrician. • Failure to follow this advice may result in electrical shock or death.
installation. • This appliance is to be properly installed and earthed only by a suitably qualified person. • This appliance should be connected to a circuit which incorporates an isolating switch providing full disconnection from the power supply. • Failure to install the appliance correctly could invalidate any warranty or liability claims. Operation and maintenance Electrical Shock Hazard • Do not cook on a broken or cracked cooktop.
not be affected by the electromagnetic field. • Failure to follow this advice may result in death. Hot Surface Hazard • During use, accessible parts of this appliance will become hot enough to cause burns. • Do not let your body, clothing or any item other than suitable cookware contact the Induction glass until the surface is cool. • Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot • Keep children away.
• Never leave any objects or utensils on the appliance. • Do not place or leave any magnetisable objects (e.g. credit cards, memory cards)or electronic devices (e.g. computers, MP3 players) near the appliance, as they may be affected by its electromagnetic field. • Never use your appliance for warming or heating the room. • After use, always turn off the cooking zones and the cooktop as described in this manual (i.e. by using the touch controls).
manual. All other servicing should be done by a qualified technician. • Do not use a steam cleaner to clean your cooktop. • Do not place or drop heavy objects on your cooktop. • Do not stand on your cooktop. • Do not use pans with jagged edges or drag pans across the Induction glass surface as this can scratch the glass. • Do not use scourers or any other harsh abrasive cleaning agents to clean your cooktop, as these can scratch the Induction glass.
reduced physical,sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. •Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. •WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire.
be supervised continuously. WARNING:In order to prevent tipping of the appliance,this stabilizing means must be installed.Refer to the instructions for installation. WARNING:Use only hob guards designed by the manufactuer of the cooking appliance or indicated by the manufacture of the appliance in the instruction for use as suitable or hob guards incorporated in the appliance.The use of inappropriate guards can cause accidents. This appliance incorporates an earth connection for functional purposes only.
Product Overview Top View (IH60BF) 1. max. 2000 W zone 2. max. 1500 W zone 3. max. 2000 W zone 4. max. 1500 W zone 5. Glass plate 6. Control panel Control Panel (IH60BF) 1. Heating zone selection controls 2. Timer control 3. Power / Timer regulating key 4. Key lock control 5.
Top View (IH30BF) 1. max. 1500 W zone 2. max. 2000 W zone 3. Glass plate 4. Control panel Control Panel (IH30BF) 1. Heating zone selection controls 2. Timer control 3. Power / Timer regulating key 4. Key lock control 5. ON/OFF control A Word on Induction Cooking Induction cooking is a safe, advanced, efficient, and economical cooking technology. It works by electromagnetic vibrations generating heat directly in the pan, rather than indirectly through heating the glass surface.
Before using your New Induction Hob • Read this guide, taking special note of the ‘Safety Warnings’ section. • Remove any protective film that may still be on your Induction hob. Using the Touch Controls • • • • The controls respond to touch, so you don’t need to apply any pressure. Use the ball of your finger, not its tip. You will hear a beep each time a touch is registered. Make sure the controls are always clean, dry, and that there is no object (e.g. a utensil or a cloth) covering them.
the same size as the cooking zone. Use pans whose diameter is as large as the graphic of the zone selected.Using a pot a slightly wider energy will be used at its maximum efficiency.If you use smaller pot efficiency could be less than expected.Pot less than 140 mm(5 1/2 in) could be undetected by the hob. Always centre your pan on the cooking zone. Always lift pans off the Induction hob – do not slide, or they may scratch the glass. Using your Induction Hob To start cooking 1. Touch the ON/OFF control.
3. Touching the heating zone selection control, and an indicator next to the key will flash 4. Select a heat setting by touching the “-“ or “+” control. • If you don’t choose a heat setting within 1 minute, the induction hob will automatically switch off. You will need to start again at step 1. • You can modify the heat setting at any time during cooking.
2. Turn the cooking zone off by touching the “-” and scrolling down to “0”. Make sure the display shows ”0”, then shows ”H”. 3. Turn the whole cooktop off by touching the ON/OFF control. 4. Beware of hot surfaces, “ H ” will show which cooking zone is hot to touch. It will disappear when the surface has cooled down to a safe temperature. It can also be used as an energy saving function if you want to heat further pans, use the hotplate that is still hot.
When the hob is in the lock mode,all the controls are disable except the ON/OFF , you can always turn the induction hob off with the ON/OFF control in an emergency,but you shall unlock the hob first in the next operation Over-Temperature Protection A temperature sensor equipped can monitor the temperature inside the Induction hob. When an excessive temperature is monitored, the Induction hob will stop operation automatically. Detection of Small Articles When an unsuitable size or non-magnetic pan (e.g.
If you are not selecting any cooking zone 1. Make sure the cooktop is turned on. Note: you can use the minute minder even if you’re not selecting any cooking zone. 2. Touch timer control, the minder indicator will start flashing and “30” will show in the timer display. 3. Adjust the timer setting by touch the “-” or “+” controls. The minute minder indicator will start flashing and will show in the timer display. Hint: Touch the “-” or “+” control of the timer once to decrease or increase by 1 minute.
6. Buzzer will beep for 30 seconds and the timer indicator shows “- - “ when the setting time finished. NOTE: The cooker will continue to cook, this timer function is a minute minder only, it does not turn the cooktop off. Setting the timer to turn one cooking zone off 1. Touching the heating zone selection control that you want to set the timer for. 2. Touch timer control, the minder indicator will start flashing and “30” will show in the timer display. 3.
4. To cancel the timer, touch the heating zone selection control, and then touch the ‘Timer ’. The minute display will show “--”. 5. When the time is set, it will begin to count down immediately. The display will show the remaining time and the timer indicator flash for 5 seconds. NOTE: The red dot next to power level indicator will illuminate indicating that zone is selected. 6. When cooking timer expires, the corresponding cooking zone will be switch off automatically.
2. When cooking timer expires, the corresponding cooking zone will be switch off automatically. NOTE: If you want to change the time after the timer is set, you have to start from step 1. Cooking Guidelines Take care when frying as the oil and fat heat up very quickly, particularly if you’re using Power Boost. At extremely high temperature oil and fat will ignite spontaneously and this presents a serious fire risk. Cooking Tips • When food comes to the boil, reduce the temperature setting.
– the firmer it feels the more ‘well done’ it will be. 5. Leave the steak to rest on a warm plate for a few minutes to allow it to relax and become tender before serving. For stir-frying 1. Choose an induction compatible flat-based wok or a large frying pan. 2. Have all the ingredients and equipment ready. Stir-frying should be quick. If cooking large quantities, cook the food in several smaller batches. 3. Preheat the pan briefly and add two tablespoons of oil. 4.
Care and Cleaning What? How? Important! Everyday soiling on glass (fingerprints, marks, stains left by food or non-sugary spillovers on the glass) 1. Switch the power to the cooktop off. 2. Apply a cooktop cleaner while the glass is still warm (but not hot!) 3. Rinse and wipe dry with a clean cloth or paper towel. 4. Switch the power to the cooktop back on.
Hints and Tips Problem Possible causes What to do The induction hob cannot be turned on. No power. The touch controls are unresponsive. The controls are locked. The touch controls are difficult to operate. There may be a slight film of water over the controls or you may be using the tip of your finger when touching the controls. Rough-edged cookware. Make sure the induction hob is connected to the power supply and that it is switched on. Check whether there is a power outage in your home or area.
The induction hob or a cooking zone has turned itself off unexpectedly, a tone sounds and an error code is displayed (typically alternating with one or two digits in the cooking timer display). Technical fault. Please note down the error letters and numbers, switch the power to the induction hob off at the wall, and contact a qualified technician.
Technical Specification Model IH60BF IH60BF(US) Cooking Zones 4 Zones 4 Zones Supply Voltage 220-240V~ 220-240V~ Frequency 50/60Hz 50/60Hz Rating Power 6600-7200W 6600-7200W Product Size L×W×H 590X520X55mm 23 1/5*201/2*2 1/5 in Built-in Dimension A×B 560X490mm 22 1/5*19 1/2 in Model IH30BF IH30BF(US) Cooking Zones 2 Zones 2 Zones Supply Voltage 220-240V~ 220-240V~ Frequency 50/60Hz 50/60Hz Rating Power 3000-3800W 3000-3800W Product Size L×W×H 288X520X62 mm 11*20 1/2*2 1
Model L W H D A B X IH60BF 590mm 520mm 55mm 51mm 560mm 490mm 50mm mini IH60BF 231/5 in 201/2 in 2 1/5 2 in (US) IH30BF 288mm 520mm 62mm 58mm 22 1/5 19 1/2 2 in in in mini 268mm 500mm 50mm mini IH30BF (US) 11 in 20 1/2 2 1/2 in in 2 1/5 in 10 3/5 19 4/5 2 in in in mini Under any circumstances, make sure the Induction cooker hob is well ventilated and the air inlet and outlet are not blocked. Ensure the Induction cooker hob is in good work state.
A B C D E 760mm 50mm mini 2 in mini 20mm mini Air intake Air exit 5mm 4/5 in Air intake Air exit 1/5 inc 30 in mini Before locating the fixing brackets The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the controls protruding from the hob. Fix the hob on the work surface by screw four brackets on the bottom of hob (see picture) after installation.
Model: IH60BF A B C D screw bracket Screw hole base Adjust the bracket position to suit for different work surface’s thickness.
Model: IH30BF A B C D screw bracket Screw hole base Cautions 1. The induction hotplate must be installed by qualified personnel or technicians. We have professionals at your service. Please never conduct the operation by yourself. 2. The hob will not be installed directly above a dishwasher, fridge, freezer, washing machine or clothes dryer, as the humidity may damage the hob electronics 3.
4. The wall and induced heating zone above the table surface shall withstand heat. 5. To avoid any damage, the sandwich layer and adhesive must be resistant to heat. Connecting the hob to the mains power supply The power supply should be connected in compliance with the relevant standard, or a single-pole circuit breaker. The method of connection is shown below.
1. If the cable is damaged or needs replacing, this should be done by an after-sales technician using the proper tools, so as to avoid any accidents. 2. If the appliance is being connected directly to the mains supply, an omnipolar circuit breaker must be installed with a minimum gap of 3mm between the contacts. 3. The installer must ensure that the correct electrical connection has been made and that it complies with safety regulations. 4. The cable must not be bent or compressed. 5.
