Product Manual

6 7
GENERAL INFORMATION
CONNECTING & DISCONNECTING
TO GAS SOURCE
Familiarise yourself with the general information
and safety guidelines located at the front of this
manual.
Check
1. Gas cylinder is filled. A sloshing sound will be
heard when shaken.
Connecting
1. Ensure valve is in OFF position.
2. Check for any damage to the cylinder
connection.
3. Attach the hose to the cylinder valve and
tighten firmly with a spanner.
4. Use a soapy water solution to check the joint. If
bubbles appear the connection will need to be
re-tightened.
LIGHTING PROCEDURE
Burner Operation & Ignition System Check
1. With cylinder valve in ‘OFF’ position check the
piezo igniter by pushing in. Check for sparking to
the burner.
2. If spark is not evident at the burner ignition point,
check that the ignition lead is firmly attached to
the control and sparker tip.
3. With sparking established install the hotplate
and open the cylinder valve whilst pushing the
igniter.
4. If the burner fails to light after several attempts turn
off gas and inspect for obstructions to gas flow.
If re–ignition is necessary while the gas barbecue is
still hot, you must wait for a minimum of 5 minutes
before commencing to re–ignite (this allows
accumulated gas fumes to clear).
Overall Barbecue Dimensions
Length Width Height
500mm 300mm 290mm
IMPORTANT
• CAUTION: When the barbecue is
not in use, the gas cylinder must be
disconnected.
• Check that the seals between the
appliance and the gas cylinder are in place
and in good condition before connecting
the gas cylinder.
• Do not use this appliance if it has
damaged or worn seals.
• NOTE: If for some reason, ignitor fails
to produce a spark at the electrode,
barbecue can be lit by a long barbecue
match.
• Do not smoke when attempting to ignite
barbecue.
• Always use protective gloves when
handling hot components.