Installation and Operation Guide

10 11

ASSEMBLY INSTRUCTIONS

Step 11

Slide the water/wood chip tray (27) into the lower cabinet as shown.

Step 12

Use 1 x M6 x 12 screw (AA) to secure the regulator hose fastener (26) onto right front leg. Locate the hose through the

fastener to secure the hose above the ground. By securing the hose it prevents the hose from coming in contact with the

hot burner assembly.

Locate the S-hook (28) onto the right side carry handle. When the smoker is not in use, hang the hose/regulator from the

side handle. This will help prevent dirt or other particles from entering the regulator.