Brochure

ManualsBrandsGastite ManualsHeating SpecialtiesTerm. Fitting Mounting Kit - Fits 3/8" - 1" CSST

Commercial

Industrial

Residential

PRODUCT CATALOG

Metallically-Shielded

Flexible Gas Piping System

April 2018

www.gastite.com

Summary of content (16 pages)

PAGE 1
Metallically-Shielded Flexible Gas Piping System PRODUCT CATALOG Commercial | Industrial | Residential April 2018 www.gastite.
PAGE 2
TABLE OF CONTENTS FlashShield™ Introduction............................................................................................ Page 3 FlashShield Corrugated Stainless Steel Tubing (CSST)............................................... Page 4 XR3-Series Straight Fittings............................................................................................. Page 5 XR3-Series Termination Fittings.....................................................................................
PAGE 3
FLASHSHIELD™ – SAFETY IN LAYERS, WITHOUT ADDITIONAL BONDING PRODUCT DESCRIPTION: FEATURES & BENEFITS: FlashShield™ is CSA design certified to ANSI LC1 for “Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing (CSST)” and ICC-ES PMG LC1027 for protective jacketed CSST. CSST supplies natural gas or liquefied petroleum gas (LP gas) to appliances. Simple hand tools such as tubing cutters, wrenches and the Jacket Stripping Toolare all that are needed to work with the FlashShield components.
PAGE 4
FLASHSHIELD™ CORRUGATED STAINLESS STEEL TUBING (CSST): APPLICATION: • CSST flexible gas piping supplies natural gas or liquefied petroleum gas to appliances. MATERIAL / SPECIFICATIONS: • Tubing: ASTM A240 Type 304, Stainless Steel. • Jacket: Electrically insulative and UV resistant polymer cover. System complies with requirements of ASTM E84 25/50.
PAGE 5
XR3-SERIES FITTINGS: APPLICATION: • Straight Fittings connect the flexible gas tubing to gas supply, distribution manifolds or gas appliances. • Couplings allow for the splicing and additions to the flexible gas tubing. • Termination Fittings create a fixed point “stub-out” on a wall or floor surface. • Termination Bracket Fittings provide a secure attachment point for key-valves and as an alternate termination point. MATERIAL / SPECIFICATIONS: • Fitting adapter, bushings and nut – Brass.
PAGE 6
XR3-SERIES FITTINGS Continued: Termination Fitting with No Flange Termination Bracket Fitting Tee Run Run Tee Fitting XR3 TERMINATION FITTING WITH NO FLANGE (ADAPTER/NUT/BUSHING) Part No. Description XR3TRM-8-NF-12 1/2” XR3 Term. Fitting - 1/2” NPT (no flange) XR3TRM-11-NF-12 3/4” XR3 Term. Fitting - 3/4” NPT (no flange) XR3TRM-16-NF-6 1” XR3 Term. Fitting - 1” NPT (no flange) XR3TRM-20-NF-6 1-1/4” XR3 Term. Fitting - 1-1/4” NPT (no flange) XR3TRM-24-NF-4 1-1/2” XR3 Term.
PAGE 7
XR3-SERIES APPLIANCE STUB-OUTS: Appliance Stub-Outs XR3-SERIES APPLIANCE STUB-OUTS Part No. Description XR3-APSTUB-8-10 1/2” XR3 x 1-1/2” Stub Length x 1/2” NPT XR3-L-APSTUB-8-10 1/2” XR3 x 2-1/4” Stub Length x 1/2” NPT XR3-APSTUB-11-10 3/4” XR3 x 1-1/2” Stub Length x 1/2” NPT XR3-L-APSTUB-11-10 3/4” XR3 x 2-1/4” Stub Length x 1/2” NPT XR3-APSTUB-11-11-10 3/4” XR3 x 1-1/2” Stub Length x 3/4” NPT XR3-L-APSTB-11-11-10 3/4” XR3 x 2-1/4” Stub Length x 3/4” NPT Pkg. Qty.
PAGE 8
PIPE SUPPORT SYSTEM: APPLICATION: • Effectively anchors and supports lightweight CSST, as well as other fuel gas piping materials to any roofing membrane. MATERIAL / SPECIFICATIONS: • Made of 100% recycled material, UV resistant and waterproof. • Will not damage expensive roof membranes. • Installs on any roof with or without standard roof adhesives. PIPE SUPPORT SYSTEM Part No.
PAGE 9
PROTECTION DEVICES AND BONDING CLAMPS Continued: Steel Conduit Bonding Clamp PROTECTION DEVICES – STEEL CONDUIT COILS Part No. Description FLOPPY12 3/4” Coil steel conduit – Fits 3/8” CSST FLOPPY16 1” Coil steel conduit – Fits 1/2” CSST FLOPPY20 1-1/4” Coil steel conduit – Fits 3/4” CSST FLOPPY24 1-1/2” Coil steel conduit – Fits 1” CSST FLOPPY28 1-3/4” Coil steel conduit – Fits 1-1/4” CSST FLOPPY36 2-1/4” Coil steel conduit – Fits 1-1/2” CSST FLOPPY48 3” Coil steel conduit – Fits 2” CSST Pkg. Qty.
PAGE 10
TUBING CUTTERS AND JACKET STRIPPER: APPLICATION: • Tubing Cutters, fitted with cutting wheel designed to cut stainless steel, create clean cuts for optimal flaring of tubing. • Jacket Stripping Tool for cutting and remoal of outer CSST jackets & metal shield before connecting fitting. Allows for clean, quick and proper fitting assembly. MATERIAL / SPECIFICATIONS: • Aluminum alloy body. • Jacket Stripping Tool - durable plastic body and stainless steel blade. TUBING CUTTERS Part No.
PAGE 11
REGULATORS Continued: VENT PROTECTION Part No. Description VP3 Maxitrol, Outdoor Vent Protector, fits 1/8” NPT vent orifice (fits -3 and 300 series) VP5 Maxitrol, Outdoor Vent Protector, fits 3/8” NPT vent orifice (fits -5 and 600 series) VP14 Pietro Fiorintini, Outdoor Vent Protector, fits 1/4” NPT vent orifice (fits 30051, 52, 53) VP12 Pietro Fiorintini, Outdoor Vent Protector, fits 1/2” NPT vent orifice (fits 30153 and -7) Pkg. Qty. 1 Ea. Lbs./Ea. 0.1 1 Ea. 0.1 1 Ea. 0.1 1 Ea. 0.
PAGE 12
UNDERGROUND GAS POLYETHYLENE (PE) PIPING FEATURING THE CON-STAB I.D. SEAL® FITTINGS FROM CONTINENTAL INDUSTRIES, INC. PRODUCT DESCRIPTION: FEATURES & BENEFITS: Unlike above-grade gas piping installations that require metallic piping, underground systems need to perform in harsh and corrosive environments. Metallic pipe installed underground requires additional and costly materials to protect the pipe.
PAGE 13
IRON PIPE SIZE (IPS) TUBING, ANODELESS RISERS AND FITTINGS PE Tubing Flex Riser Gas Riser Transition Fitting Coupling Reducing Tee Tapping Tee IRON PIPE SIZE (IPS) TUBING Part No. Description PE-12-250 3/4” IPS (SDR-11) – PE Tubing (30” ID x 45” OD) PE-12-125 3/4” IPS (SDR-11) – PE Tubing (24” ID x 35” OD) PE-12-500 3/4” IPS (SDR-11) – PE Tubing (30” ID x 42” OD) Pkg. Qty 250 ft./coil 125 ft./coil 500 ft./coil Lbs./Coil/Ea. 31.0 15.0 60.
PAGE 14
COPPER TUBE SIZE (CTS) TUBING, ANODELESS RISERS AND FITTINGS PE Tubing Flex Riser Gas Riser Copper Coupling COPPER TUBE SIZE (CTS) TUBING Part No. Description PE-8-250 1/2” CTS (SDR-7) – PE Tubing (26”ID x 36” OD) PE-8-125 1/2” CTS (SDR-7) – PE Tubing (24” ID x 31” OD) PE-8-500 1/2” CTS (SDR-7) – PE Tubing (30” ID x 38” OD) PE-16-250 1” CTS (SDR-11.5) – PE Tubing (25”ID x 45” OD) PE-16-125 1” CTS (SDR-11.5) – PE Tubing (24” ID x 35” OD) PE-16-500 1” CTS (SDR-11.5) – PE Tubing (30” ID x 44” OD) Pkg.
PAGE 15
TOOLS AND ACCESSORIES Magnetic Tape Riser Bracket TOOLS AND ACCESSORIES Part No Description MAG-TAPE Magnetic Tape – 2” x 1,000 ft. roll Pkg. Qty. 1 Ea. Lbs. 1.0 RBRACE-1 PECUTTER PECUTTER-32 PEBLADE Riser Bracket – Up to 1-1/2” PE Cutter – Up to 1-1/4” PE Cutter – Up to 2” Replacement Blade for PECUTTER 1 Ea. 1 Ea. 1 Ea. 1 Ea. 4.0 0.3 2.5 0.
PAGE 16
Titeflex Corporation 1116 Vaughn Parkway Portland, TN 37148 Toll Free: 800.662.0208 Fax: 615.325.9407 E-mail: gastite@gastite.com www.gastite.com Rev.