Operation Manual

50
English
8 Operation
8.1 Switching the appliance on
In order to switch on the appliance push the mains plug into the socket.
8.2 Setting the temperature
The temperature can be set at from 0°C to 10°C. At ELDC300,
ELDC300XL, GCDC400, GCGD310, GCGD360 and GCKS360 it is set by
the knob. At GCDC350, GCDC800, GCDC1050, GCUC100, GCUC200
and GCUC300 it is set by pressing the following buttons:
1. Press „SET“ button, the set temperature is displayed.
2. Press UP (warm) and DOWN (cold) button to set the new temperature.
3. Press „Set“ again to save and exit the adjustment.
4. If no more button is pressed within 10 seconds the actual cooler
inside temperature will be displayed.
ECDC300, ELDC300XL, GCDC350, GCDC800, GCDC1050,
GCDC400, GCGD310, GCUC200, GCUC300
GCGD360, GCKS360
NOTE
Please note that the temperature will change depending on the
ambient temperature (installation site), the frequency of opening
the door and the fi ttings.
1
0
5
4
3
2




Up
Down
°C
SET
ELDC300_ELDC300XL_GCGD310_360_GCKS360_GCDC350_400_800_1050_UC100_200_300_Manual_DE_EN_NL_DIN A5_1509.indd 50ELDC300_ELDC300XL_GCGD310_360_GCKS360_GCDC350_400_800_1050_UC100_200_300_Manual_DE_EN_NL_DIN A5_1509.indd 5024.11.2015 15:49:2324.11.2015 15:49:23