Design Multi Juicer Digital User guide

provided. With the motor running, place food into the feed chute and use the food
pusher to gently guide food down. To extract the maximum amount of juice, always push
the food pusher down slowly.
Note: The Juicer will automatically stop operating if the motor is stalled for more than
10 seconds. This is a safety feature. Either too much food is being processed at one time
or the pieces are not small enough. Try trimming food, cutting food into smaller pieces
of even size and/or processing a smaller amount per batch. To continue juicing, reset
the Design Multi Juicer Digital by pressing the ‘On/Off’ switch on the control panel to
‘Off’, then turn the appliance back on by pressing the ‘On/Off’ switch to ‘On’.
Step 5:
As fruit and vegetables are processed, juice will flow into the juice jug and the separated
pulp will accumulate in the pulp container.
ATTENTION: Do not allow the pulp container to overfill as this may affect the operation
of the appliance (refer to disassembling instructions). Reassemble the machine to
continue juicing. To minimise cleaning, line the pulp container with a plastic freezer bag
to collect the pulp. Pulp can then be used in other dishes (see recipes), or as compost for
the garden or discarded (see page 17).
Empty the pulp container during juicing
The pulp container can be emptied during juicing by turning the appliance ‘Off’ at the control
panel and then carefully removing the pulp container. Remove the pulp container by tilting the
pulp container slightly to the right and unlatch it from under the juicer cover and the
container support extending from under the motor base. Replace the empty pulp container
into position before continuing to juice.
Overheat protection
The Design Multi Juicer Digital will automatically stop operating if the motor is stalled for
more than 10 seconds. This is a safety feature. Either too much food is being processed at
one time or the pieces are not small enough. Try trimming food, cutting food into smaller
pieces of even size and/or processing a smaller amount per batch. To continue juicing,
reset the appliance by pressing the ‘On/Off’ switch on the control panel to ‘Off’, then turn the
appliance back on by pressing the ‘On/Off’ switch to ‘On’.
Disassembling your Design Multi Juicer Digital
WARNING: Always turn the appliance off and pull the plug when the appliance is not
in use or when disassembling, moving or cleaning the appliance.
Step 1:
Ensure the appliance is turned off by pressing the ‘On/Off’ switch on the control panel
to ‘Off’. Then switch the appliance off at the power outlet and unplug the cord.
11
40128_designmultijuicerdigital_manual_englisch_0309.qxp 11.03.2009 08:37 Seite 11