GASTROBACK ® Operating Instructions Design Hand Blender Advanced Art.-Nr.
Carefully read all provided instructions before you start running the appliance and pay attention to the warnings mentioned in these instructions. Table of Contents Knowing your Design Hand Blender Advanced...........................................................20 Important safeguards................................................................................................21 Safeguards for daily operation..............................................................................
Dear Customer! Congratulations! Your new Design Hand Blender Advanced comes with some remarkable features for preparing your dishes. The appliance is designed for mixing and stirring of liquid foods, and for pureeing and chopping of not very hard foods such as carrots, potatoes, meat and other. Your new Design Hand Blender Advanced is perfectly suited for mixing drinks and milkshakes as well as preparing dips, sauces, soups, mayonnaise and baby food.
Knowing your Design Hand Blender Advanced A B C I D J E F K L G M H N A variable speed switch B ON-button C turbo-button D motor block E release-buttons F stainless steel blender G whisk holder H stainless steel whisk I chopper lid J chopper blade K chopper vessel (500 ml) L lid/non-slip-rubber base for the chopper M mixing vessel (800 ml) N lid/non-slip-rubber base for the mixing vessel O wall mount (not shown) 20
Important safeguards Carefully read all instructions before operating and save the instructions for future reference. Do not attempt to use this appliance for any other than the intended use, as described in these instructions. Any other use, especially misuse, can cause severe injury or damage by electric shock, fire or moving mechanical parts. Never leave the appliance unattended when in operational mode. These instructions are an essential part of the appliance.
provided). During operation, ensure that the processing tool will not touch the interior of the vessel. • Close supervision is necessary when the appliance is used near young children. Do not let young children play with any parts of the appliance or the packing. The appliance is NOT intended for use by children or infirm persons without supervision. Take care that no one pulls the appliance by the power cord, especially when young children are near.
rate the appliance with broken or crooked tools to avoid injuries trough moving parts and overheating of the appliance. • Always IMMEDIATELY unplug the appliance after use and before assembling or dismantling the appliance and its tools and before laying down the appliance. • Before operation, always ensure that the appliance is assembled and connected completely and correctly according to the instructions in this booklet. Do not handle the appliance or any part of it with violence.
Technical specifications Model: Art. No. 40974 Design Hand Blender Advanced Power supply: 220-240 V AC, 50/60 Hz Maximum power consumption: 800 W Length of power cord: approx. 120 cm Weight: motor block: approx. 780 g stainless steel blender: approx. 160 g stainless steel whisk with holder: approx. 85 g mixing vessel: approx. 200 g chopper attachment (assembled): approx. 380 g Dimensions: motor block: approx. 55 x 55 x 210 mm (W x D x H) stainless steel blender: approx.
the ON-button, immerse the processing tool in the food (up to the half of its height at most), to avoid excessive splashing and dripping of liquids onto the appliance. 1. Prepare your food and fill it into a sufficiently large and high-sided vessel (like the vessel provided). WARNING: The provided vessel is not heat resistant. The max. tempera- ture is 70 degrees. Let the boiling food cool down a little bit before starting to blend. 2. Ensure, that the appliance is unplugged. 3.
Using the stainless steel whisk Use the whisk only for whipping cream, beating egg whites and mixing sponges and Ready-mix desserts. WARNING: Always release the ON-button, wait until the motor stops and unplug the appliance before lifting the whisk tool out of the food, laying down the appliance or assembling/dismantling the whisk tool. Before connecting the appliance to the mains power supply, always ensure that the appliance is assembled correctly, according to the following instructions.
WARNING: Always release the ON-button, wait until the motor stops completely and unplug the appliance before assembling or dismantling the tools. 10. Release the stainless steel whisk form the motor block by pressing both release-buttons. Clean the appliance in accordance to the instructions in chapter ›Care and cleaning‹. Do not leave any food to dry on the surface of the appliance.
CAUTION: Do not use the appliance with the chopper attachment in continuous operation for more than 1 minute to avoid overheating. If processing large quantities of food, regularly interrupt the operation and unplug the appliance for a few minutes, allow the motor to cool down. 8. Chop your food to the desired quality, but at least after 1 minute of continuous operation release the ON-button. 9. Wait until the motor stops.
fire. Always handle with care and without violence. CAUTION: Do not use abrasive cleaners, cleaning pads, corrosive chemicals (disinfectants, bleach) or any sharp or hard objects (i.e. metal scouring pads) for cleaning, for this could damage the surfaces. Note: after processing very salty ingredients clean the appliance immediately to avoid stains and damage. Carefully clean the appliance and the vessel with a damp sponge or cloth and warm soapy water.
Storage Always clean the appliance before storing (see ›Care and cleaning‹). Ensure to store the appliance where it is clean, dry and safe from frost, direct sunlight and inadmissible strain (mechanical or electric shock, heat, moisture) and where it is out of reach of young children. Place the appliance on a clean and stable surface, where it can not fall. Do not place any hard or heavy objects on the appliance. You may wind the power cord loosely around the motor housing.