Design Hand Blender Advanced User guide

Technical specifications

Model:

Art. No. 40974 Design Hand Blender Advanced

Power supply:

220-240 V AC, 50/60 Hz

Maximumpowerconsumption:

800 W

Length of power cord:

approx. 120 cm

Weight:

motor block: approx. 780 g

stainless steel blender: approx. 160 g

stainless steel whisk with holder: approx. 85 g

mixing vessel: approx. 200 g

chopper attachment (assembled): approx. 380 g

Dimensions:

motor block:

approx. 55 x 55 x 210 mm (W x D x H)

stainless steel blender:

approx. 6,5 x 205 mm (ø x H)

stainless steel whisk with holder:

approx. 55 x 230 mm (ø x H)

mixing vessel:

approx. 110 x 215 mm (ø x H)

chopper attachment (assembled):

approx. 140 x 155 mm (ø x H)

Operation

Before First Use

WARNING: The blades are very sharp. Do not touch the blades. Always handle the

tools by the shaft.

Remove all promotional materials and packaging from the appliance and its tools, but do

not remove the rating label. Before first use and after a long period of storage, clean the

appliance with a damp soft cloth and warm soapy water (see ›Care and cleaning‹).

Note: While pressing the ON-button the speed of the blade is adjustable with the variable

speed switch. The power of the turbo-button is not adjustable.

Using the stainless steel blender

The hand blender is perfectly suited for preparing dips, sauces, soups, mayonnaise and

baby food as well as for mixing and milkshakes.

WARNING: Always release the ON-button, wait until the motor stops and unplug the

appliance before lifting the blending tool out of the food, laying down the appliance or

assembling/dismantling the blending tool.

Before connecting the appliance to the mains power supply, always ensure that the appli-

ance is assembled correctly, according to the following instructions. Do not touch the

blades of the blending tool with your hands or any objects (i.e. hair, clothes, tissue), when

it is mounted and the appliance is connected to the mains power supply. Before pressing