Operating Instructions Design Mincer Plus Art.-No.
Carefully read all provided instructions before you start running the appliance and pay attention to the warnings mentioned in these instructions. Table of Contents Knowing your Design Mincer Plus.........................................................................28 Important safeguards...........................................................................................29 Important safeguards for electrical appliances....................................................
Dear Customer! Congratulations! A variety of new possibilities for delicious meals comes with your new mincer; even for vegetarian dishes. Effortless you mince and mix the ingredients for meatballs, vegetable burgers and minced meat. With great refinement you can prepare your own sausage specialities, or fillings for ravioli or tortellini—always really fresh! These instructions for use will inform you about the various functions and features which makes it easy to take pleasure in your new mincer.
Knowing Your Design Mincer Plus A B C D H E I J K L F G M N O P Q R A Pusher B Tray C Cutter housing D Release button E Motor housing F Reverse button (REV) G ON/OFF button Tools - accessories: H Coarse grinding disc I Worm J Cutter blade K Fine grinding disc L Screw ring 28 M Separator disc N Sausage horn O Plastic finger P Cone Q Cookie attachment R Cookie former
Important safeguards Carefully read all instructions before operating this appliance, and save for further reference. Do not attempt to use this appliance for any other than the intended use, described in these instructions. Any other use, especially misuse, can cause severe injuries or damage by electric shock, moving parts, heat or fire.
always use only one of the provided grinding discs. Do not process bones, nuts, frozen foods or any other hard items. • Do not place the appliance or any part of it on or near hot surfaces (e.g. burner, heater or oven). Do not use any parts or tools of the appliance with any other device. • Do not attempt to grind bones, nuts or other hard items. • Do not grasp in the gear hole of the motor housing, with the appliance connected to the power supply. • Do not leave the appliance unattended during operation.
the edge of the table or counter. The power cord may not touch hot surfaces. Ensure that no one will pull the appliance by the power cord. Take care not to entangle in the power cord. Always grasp the plug to disconnect the power cord. Do not touch the power plug with wet hands when the appliance is connected to the power supply. • Do not place or immerse the motor housing or the power cord in water or any other liquid. Do not spill or drip any liquids on the power cord or exterior of the motor housing.
2. Carefully remove all shipping materials and promotional materials, but do not remove any warning labels or the model label. Especially ensure that there are no foreign objects (e.g. packaging) in the interior of the appliance. WARNING! Always switch off completely (ON/OFF button) and unplug the appliance, before cleaning. Do not immerse the motor housing or power cord in water or other liquids or spill any liquids on the motor housing or power cord.
The indicator of this button illuminates blue, when the appliance is connected to the power supply and switched on via the power switch. After pressing the button the motor starts working immediately. The worm shaft moves the foods to the outlet of the cutter housing. Do not let the motor work continuously for more than 3 minutes. Usually, during this time, you have processed a tablet full of meat. Thereafter, switch off the motor for 15 minutes to let the motor cool down.
Add onions and finely grinded spices, while mincing the foods for getting an even mixture. However, hard spices (e.g. pepper, nutmeg, etc.) must be grinded in a mill, before processing with the mincer. It is a good idea to fry onions for minced pork before processing. This way, onions are more flavoury and wholesome. Operation WARNING: The mincer is intended for mincing food. For this, the appliance is equipped with sharp-edged knives and other electrically driven moving parts.
WARNING: The blades of the crossed-blade knife are very sharp. Pay attention when you handle the crossed-blade knife. ATTENTION: Never use the cutter blade and the grinding disc together with the attachments. How to work with the attachments is explained further back in the instructions. Mount the grinding disc on the cutter blade. The arresting pin must lock precisely into the corresponding recesses.
1. Take the worm housing into the right hand and insert with your left hand the worm inside the worm housing. (Picture E) The side of the worm with the plastic end has to face the worm housing when putting it inside the worm housing. The worm is correctly assembled when the plastic end of the worm stands a few millimetres out of the worm housing. Take the adaptor disc. The small end with the recess has to face the worm when attaching.
Assembling for making kebbe 1. Take the worm housing into the right hand and insert with your left hand the worm inside the worm housing (picture I). The side of the worm with the plastic end has to face the worm housing when putting it inside the worm housing. The worm is correctly assembled when the plastic end of the worm stands a few millimetres out of the worm housing. Take the plastic finger. The flat end with the recess has to face the worm housing when attaching.
3. Press the feed pan onto the worm housing (picture K). 4. Place the pusher into the opening of the feed chute (picture L). The appliance is ready for operation. Assembling for making cookies 1. Take the worm housing into the right hand and insert with your left hand the worm inside the worm housing. (Picture M) The side of the worm with the plastic end has to face the worm housing when putting it inside the worm housing.
Note: When the worm housing is securely attached you can hear a click sound and the release button comes out of the recess again. 3. Press the feed pan onto the worm housing (picture O). Slide the cookie former into the cookie attachment and choose the desired cookie shape. Ensure the handle is facing away from the attachment when sliding it in otherwise you cannot use the cookie shape that is the closest to the handle. 4. Place the pusher into the opening of the feed chute (picture P).
IMPORTANT: Do not let the motor run permanently for longer then 3 minutes to avoid overheating. After 3 minutes turn off the appliance and let the motor cool down before continuing operation. In the case of overloading the motor, the overheat protection will automatically cut off the power supply. Act upon the instructions in ›Power switch / overheat protection‹. 6. As soon as the last bit is minced turn the appliance off (ON/OFF button) and disconnect the appliance from the power outlet. 7.
2. Prepare the wrapping: Mince the meat for the wrapping 3 times in total. For the first mincing procedure use the medium grinding disc then use the fine grinding disc. After mixing all the ingredients for the wrapping mince it one more time with the medium grinding disc. 3. Unscrew the closing ring and take out the grinding disc and crossed-blade knife. Operate according to the instructions ›disassembling‹ the appliance. WARNING: Do not cut yourself removing the crossed-blade knife. 4.
Solving Problems If any problems occur during operation, you will find solutions in the following table. Additionally, you can contact your vendor. Problem Possible Cause The motor does not work, The appliance is not live. the indicators are dark. Solution Insert the power plug in the power outlet. The power switch is switched Switch on the power switch. OFF. The circuit breaker is activa- Press the red button at the botted. tom of the appliance.
Clearing a blocking – reverse operation CAUTION: Do not operate the motor in reverse direction for more than a few seconds. Reverse operation moves the foods to the motor housing. Thus, foods and juices could run into the gear hole of the motor housing.
Do not leave any food dry up on the appliance or any parts of it to prevent a build up of dried-on foods. Always clean the appliance after each use according to the following instructions. Disassembling the appliance WARNING! Always switch off the ON/OFF button and power switch, wait until the motor comes to complete standstill, and unplug from power outlet, before disassembling or cleaning the appliance. 1.
Storage WARNING: Always switch off completely (ON/ OFF button and power switch), unplug and clean the appliance and all its parts before storing (see: ›Care and Cleaning‹). Ensure to store the appliance where it is clean, dry and safe from frost, direct sunlight and inadmissible strain (mechanical or electric shock, heat, moisture) and where it is out of reach of young children. Place the appliance on a clean and stable surface, where it cannot fall.
Notes for disposal Dispose of the appliance and packaging must be effected in accordance with the corresponding local regulations and requirements for electrical appliances and packaging. Please contact your local disposal company. Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available.