Operating Instructions Design Electric Knife Art.-Nr.
Carefully read all provided instructions before you start running the appliance and pay attention to the warnings mentioned in these instructions. Table of contents Important instructions................................................................................................15 Important safeguards................................................................................................16 Safeguards for daily operation............................................................................
IMPORTANT INSTRUCTIONS • Always release the on button, unplug the appliance and wait for the motor to stop, before assembling/dismantling or cleaning the appliance. • WARNING: Moving the on switch the motor does function even when the blades are not correctly assembled. Ensure that the blades are correctly connected before attaching them to the handle to avoid personal injury. Always use both blades when operating the Electric Knife.Do not place your fingers in the blade slot of the handle.
The Gastroback Design Electic Knife is applicable for multifunctional purposes such as cutting meat, vegetables, bread, pastry, etc. Important safeguards Carefully read all instructions before operating and save the instructions for future reference. Do not attempt to use this appliance for any other than the intended use, as described in these instructions. Any other use, especially misuse, can cause severe injury or damage by electric shock, fire or moving mechanical parts.
or oven). Do not place the appliance near the edge of the surface or on inclined or wet surfaces or where it can fall. Keep the entire appliance away from direct sunlight and sharp edges. • Always IMMEDIATELY release the on button, wait for the blades to stop moving, and then unplug the appliance, if the appliance is not in use (even for a short break) and before assembling, dismantling or cleaning. • Do not immerse the motor housing or power cord in water or any other liquid.
or wet or is touching wet surfaces while connected to the mains power supply. In this case, immediately unplug the appliance and dry the appliance (see ›Care and Cleaning‹). Moving parts – risks of injury to persons • Always release the on button, unplug the appliance and wait for the motor to stop, before assembling/dismantling or cleaning the appliance. Always place the appliance on a stable, level and dry surface, where it can not fall. • The blades of the knife insert are extremely sharp.
Ergonomic handle: It provides convenient and simple to operate. The ergonomic design provides comfort, versatility and control when carving both vertically and horizontally. Stand: The knife can stand on the table. The blades should always face down. Safety guards: It is a handle for insert and removal of blades. Operation The Electric Knife works extremely quick and is designed only for short time operation of max. 7 minutes.
WARNING: Ensure that the blades are correctly connected to avoid personal injury. The safety guards should be facing the outside and the blades are not getting easily taken apart. 3. Hold assembled blades by the safety guards and slice shafts gently into the blade slot until clipped into safety guard position (see picture). Make sure blades inserted to main body in position. Try to pull out blades carefully. If blades do not move, blades are fixed to main body.
Tips for best cutting results • Always place food to be sliced on a wooden or plastic cutting board. Do not slice food on china, metal or bench tops, as scratching may occurs. • Use the multifunctional blade for cutting meat and bread and the wavy blade for cutting vegetable, fruit, cakes and alike. • Guide blades through food. A sawing action is not necessary. So not force blades through food.
3. Wash blades in hit soapy water with a soft cloth or sponge. Soak stubborn residues in warm dish-water for ca. 10 minutes, before cleaning. Rinse thoroughly and dry completely. Do not use abrasive scourcing pads or powders on blades. 4. Wipe the motor housing and power cord with a damp soft cloth. Take care not to spill or drip water or any other liquids on the motor housing. 5. Thoroughly dry the motor housing and all parts of the appliance after each cleaning.
Notes for disposal Dispose of the appliance and packaging must be effected in accordance with the corresponding local regulations and requirements for electrical appliances and packaging. Please contact your local disposal company. Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available.
Gewerbestraße 20 . D-21279 Hollenstedt / Germany Telefon +49 (0)41 65/22 25-0 . Telefax +49 (0)41 65/22 25-29 info@gastroback.de . www.gastroback.
