Design Coffee Aroma Plus Owner manual

• Always allow the appliance to cool down to room temperature before opening the cover

and/or disassembling any part of the appliance (e.g. filter basket) and/or moving, cleaning

the appliance. Always empty the water reservoir completely before transportation, cleaning or

storing the appliance.

Technical Specifications

Model: Art.-No.: 42703 Design Coffee Aroma Plus

Power supply: 220/230 V AC, 50 Hz

Power consumption: 950 W

Length of power cord: ca. 110 cm

Weight: ca. 2.7 kg

Dimensions: (width x depth x height) ca. 231mm x 222 mm x 360 mm

Maximum capacity of water reservoir: 1.7 Litre (ca. 12 cups)

Filter bags: Coffee filter bags, size 1 x 4

Certification:

Operation

Before First Use

WARNING: DO NOT allow young children playing with the appliance, or any

part of it including the packaging!

It is important to carefully remove all packaging and shipping/promotional materials as well

as any price-tags. Ensure that there are no foreign objects (e.g. packaging) in the water reser-

voir or filter basket, before use. Exclusively place the appliance on a stable, flat, and heat and

moisture resistant surface of suitable size. (See: “Important Safeguards“) DO NOT place

the appliance on an inclined surface.

1. Unpack the appliance carefully, and remove all packaging and shipping/promotional

materials, but DO NOT remove the model label. Check, if there are any parts damaged or

missing.

2. Place the coffeemaker on a level (not inclined!), hard, flat surface near a suitable wall

power outlet (See: “Important Safeguards“) and connect the coffeemaker to the power supply.

The time display in the centre of the front panel illuminates.

3. Before first use and after storing it is recommended that you clean your coffeemaker by

simply running through two brewing cycles with empty filter basket (without filter bag and

coffee powder) as described in the section below. (See: “Preparing Some Cups of Coffee“)