Design Coffee Aroma Pro Manual

30 31
3. After all parts are washed for the first time, pour cold water up to the 12 cup level mark in
the water reservoir. Brew it through the coffeemaker as instructed in BREWING Coffee, but do
not add coffee grounds to the Longlife Durable Filter. When done, turn off the coffeemaker and
discard the water from the carafe.
Operating the control panel
Audio signals
1. When the unit is plugged in, one beep can be heard.
2. When the coffee has finished brewing, three beeps can be heard.
3. When the warming state is finished, five beeps can be heard.
Brewing
Warm-Keeping
Program button
for timer function
Clock setting the hours
Activation Auto On
Function
LCD-Display time
Display coffee bold
Display coffee regular
Clock setting the
minutes
Cleaning indicator
Stop button
(deactivation of the
programs)
Setting brew strength
Start button
(activation of the programs)
Setting the clock
You may set the clock any time before, during or after brewing. However, you must connect the
coffeemaker to the power supply. The coffeemaker will keep the setting as long as it is connected
to the power supply.
1. Set the time of day by pressing the hour and minute button. Be sure to set the time with the
correct AM and PM designation.
2. You can make the hours and minutes move more quickly in the clock display by holding the
buttons down.
3. After a few seconds the clock display turns off, but the clock still keeps time.
The Auto On Function
Using the Auto On Function, you can program your coffeemaker to prepare your coffee
automatically on a pre-defined time (e.g. on your lunch break).
WARNING: Please keep in mind that the coffeemaker will be left unattended, while
connected to the power supply, and during operation. Thus, special care is necessary to
avoid injuries to persons or damage caused by fire, electric shock or hot liquids and steam.
Thus, closely and meticulously keep to the instructions in the section Important Safeguards.
Always ensure that you prepared the coffeemaker correctly and completely for the brewing
cycle, before activating automatic operation.