Design Coffee Aroma Pro Manual

32 33
We strongly recommend, performing and attending a normal brewing cycle to learn, how
to operate your coffeemaker correctly, before using automatic operation. In this way you
will recognize problems, arising from the handling your coffeemaker.
Note: Automatic operation is only possible, when the clock and start time are adjusted.
WARNING: Special care is necessary, when leaving any electrical appliance unatten-
ded while connected to the power supply and during operation.
Always ensure that the coffeemaker is prepared correctly and completely for a brewing
cycle, according to the instructions in section Preparing Some Cups of Coffee, before star-
ting automatic operation, and leaving the coffeemaker unattended.
Especially ensure that the filter basket and glass carafe are inserted correctly and the cover
of the coffeemaker is closed properly.
WARNING: Before using AUTO ON Function again, make absolutely sure the machine
is properly prepared for a new brew cycle!
Note: The coffee machine stores the entered time as long as it is connected to the power
supply. If you want to brew coffee at the same time within the next 12 hours again, then
prepare the brewing process before carefully and then press the AUTO ON button. A blue
light indicates that the Auto On Function is turned on.
Selecting the Auto On Function start time
Note: For adjusting the start time the clock must be set. (See: “Adjusting the Clock“)
1. Press the PROGRAM button. The standard time of 6 AM, or the last programmed start
time flashes.
2. Adjust the time you want to start the brewing cycle by using the HOUR and MIN buttons
following the procedure for setting the clock.
3. To confirm your auto brew start time, simply press the PROGRAM button and the preset
time is displayed for a few seconds on the display. Now you can modify the start time as
desired.
Activating the Auto On Function
1. Enter milled powder in the long-life filter or a paper filter. Fill the water tank with the
appropriate amount of water and make sure that the glass jug stands on the warming plate.
2. If you set the start time and the ad jump back to the current time, press the AUTO ON
button. A blue lamp will light up on this button to indicate that the coffee machine in auto-
start mode.
3. The auto-start feature can be canceled any time by pressing the STOP button. The light
on the AUTO ON button turns off. To check what time it is set for auto-start function, press
the PROGRAM button and the time is displayed