Operating instructions

54
Bowl or lid is not locked
correctly.
A safety interlock has been
released, for example, by
turning the lid while feeding
food through the feed tube.
Ensure that bowl and lid are still
mounted correctly.
Malfunction of the
appliance
Send the appliance to an autho-
rized service centre for repair.
You can not loosen the
universal ‘s’ blade from the
shaft.
You have mounted the
universal ‘s’ blade in
wrong orientation.
The universal ‘s’ blade must
be assembled ALWAYS with
the somewhat wider opening
facing downwards. Do not use
violence! Insert the handle of a
teaspoon between the central
plastic body of the tool and
the shaft and press down the
notches of the shaft to loosen
the tool.
Liquid is coming out from
under the lid.
The bowl is overfilled. Fill in no more than 500 ml.
The installed tool is not
suited best for the current
task.
For mixing, beating, and
emulsifying of liquids you should
always use the emulsifying disc.
Liquids accumulate under the
appliance and/or runs out
from under the bowl.
The bowl is leaking. Immediately unplug the appli-
ance. Contact an authorized
service centre for examination
and repair.
Care and cleaning
WARNING: Always switch OFF the appliance (indicator goes out), and then unplug the
appliance, before assembling or disassembling any parts, or moving or cleaning the appli-
ance. Do not insert your hands or any foreign objects in the feed tube, with the appliance
assembled and connected to the power supply.
Do not leave any food dry up on the appliance or any parts of it to prevent a build up of
dried-on foods. Always clean the appliance after each use according to the following instruc-
tions.
Disassembling the appliance
WARNING: The blades of the cutting tools are very sharp. Handle with care!
Always ensure that the appliance and any parts of it are out of reach of
young children.
Do not use violence! Bowl and lid are locked on the motor base for operation. Thus you
must unlock these parts by turning them counter-clockwise before you can remove them. Ad-