Installation Guide

ManualsBrandsGatehouse ManualsSecurity Doors91904052

202220786 2.2012 202220786 2.2012

SECURITY DOOR

Spanish en el reverso

PACKAGE CONTENTS

PREPARATION

MAINTENANCE

WARRANTY

ASSEMBLY INSTRUCTIONS

PART DESCRIPTION QUANTITY

A Security Door 1

MAGNUM 1 YEAR LIMITED WARRANTY

GIBRALTAR, ARES, CHEROKEE, ATHOS, SUNSET, ACHILLES 5 YEAR LIMITED WARRANTY

SUNBURST, PENDLETON LIMITED LIFETIME WARRANTY

PART DESCRIPTION QUANTITY

AA 4 in. one-way screws 8

BB Top bar 1

CC Locking side bar 1

Styles may vary

NOTE: All parts not shown at actual size.

FIGURE 1 FIGURE 5

FIGURE 2 FIGURE 6

FIGURE 3 FIGURE 7

FIGURE 4

Tools Recommended for Assembly

One-way screw tool (sold separately), drill 3/16 in. bit, level or string plumb, and pencil.

1. Security doors are ﬁnished with a heavy-duty powder coat ﬁnish. In order to maintain your ﬁnish we require cleaning and

waxing the security door 2 times per year, preferable late fall and early spring. Doors directly subjected to the sun, salt-air

or moisture may require more maintenance.

2. Any scratches or abrasions to the door ﬁnish must be immediately touched up with enamel or rust protective paint.

3. To keep your door looking like new, any signs of rust should be sanded with mild sandpaper and touched up immediately

with enamel or rust protective paint.

4. Hinges and lockset (sold separately) should be oiled and lubricated regularly to reduce friction wear.

5. Make sure any sprinklers near your new door are directed away.

6. Do not allow vegetation on your security door. This will lead to extra maintenance.

7. Make sure to keep your weed eater and lawn mower away from your security door. It may create unwanted chips to your

door ﬁnish.

This Warranty applies if you are a residential purchaser and covers—under normal and proper use and normal conditions, and as long as the product was properly installed in accordance with the Installation

Instructions provided with the product—any defects or malfunctions relating to the structural integrity of your Comfort Bilt® product’s metal structure and framing, including all welding.

What are Comfort Bilt

’s obligations under the Warranty? If any part covered by the Warranty, when properly used, is found upon inspection to be defective, Comfort Bilt

will repair or replace the defective

product or part(s), without charge. Replacements will be made with the same or a comparable quality model, and may not be the same color or style as the original due to changes and discontinuances in

styles. Comfort Bilt

shall not be responsible for securing the affected property while products are being repaired or replaced. How long does the Warranty coverage last? The Warranty terminates if you

sell or otherwise transfer the product or the property on which it was installed. How do I make a claim under the Warranty? To make a claim under the Warranty, send (a) a brief written description of the

problem and (b) proof of purchase of your Comfort Bilt

product—consisting of the original receipt, showing the date and place of purchase, and the purchase price—to Comfort Bilt

, 2333 Eastbrook Drive,

Brookings, SD 57006, Attn: Warranty Claims. Comfort Bilt

reserves the right to inspect any product before making any adjustment covered by this Warranty. What does this Warranty NOT cover? This

Warranty does NOT cover any defect or problem caused by abuse, misuse (including, but not limited to, improper installation), failure to provide proper maintenance of the warranted product, adjustments

due to the settling of the structure in which the product is installed, normal wear and tear or acts of God. In addition, the Warranty does not cover screen material which is pushed out of its groove and

damage to your home, loss of property or personal injury or death caused by vandals, break-ins, or attempted break-ins. This Warranty is null and void if you adjust, alter and/or modify the product in any

way. This Warranty does NOT cover damages in excess of the purchase price of the product, and UNDER NO CIRCUMSTANCES SHALL COMFORT BILT

BE LIABLE FOR INCIDENTAL, SPECIAL OR

CONSEQUENTIAL DAMAGES WITH RESPECT TO ECONOMIC LOSS OR PERSONAL INJURY OR PROPERTY DAMAGE, WHETHER AS A RESULT OF A BREACH OF AN EXPRESS OR IMPLIED WARRANTY,

NEGLIGENCE OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the limitation set forth above may not apply to you, in whole or in part. ANY

IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARISING UNDER STATE LAW ARE LIMITED IN DURATION TO THE PERIODS OF COVERAGE PROVIDED IN

THIS WARRANTY. Some states do not permit limitations on the duration of an implied warranty, so the limitation set forth above may not apply to you.The terms of this Warranty cannot be changed except in

writing by an ofﬁcer of Comfort Bilt®. How does state law relate to this Warranty? This Warranty gives speciﬁc legal rights only to the original retail purchaser; you may have other legal rights that vary from

state to state.

1. Identify which way the security

door is to open (Fig. 1).

5. Align the lock bolt holes in the lock-

side jamb with the extended lock bolts,

making sure the jamb is vertically true

(plumb) (Fig. 5).

2. Install the lockset (sold separately)

with 2-3/8: backset. Then, fully extend

the lock bolts into the “locked”

position (Fig. 2).

6. Mount lock-side jamb to door frame

jamb. Drill holes. Fasten lock-side

jamb to the house, using the one-way

security lag screws. Tighten lag

screws only halfway at this time. When

you are satisﬁed with the position and

operation of the security door, tighten lag

screws securely to the house (Fig. 6).

3. Place security door in front of opening

at desired height, making sure that

the security door is vertical (plumb).

Determine where to drill by marking

through the pre-drilled holes on the

hinge-side jamb with pencil (Fig. 3).

7. Insert plugs in ends of header.

Mount header jamb at top of door

using remaining 2 one-way screws.

Leave approximately 1/8 in. space

between header jamb and top of

door frame (Fig. 7).

4. Drill holes. Using the one-way security

lag screws, fasten door to house.

Tighten lag screws only halfway,

at this time, in case repositioning the

door is required later (Fig. 4).

IMPORTANT: Read all instructions carefully before starting installation.

Questions, problems, missing parts?

Before returning to your retailer, call our customer service department at 1-800-222-3667.

Summary of content (2 pages)

PAGE 1
202220786 2.2012 SECURITY DOOR Spanish en el reverso 202220786 2.2012 ASSEMBLY INSTRUCTIONS 5. Align the lock bolt holes in the lockside jamb with the extended lock bolts, making sure the jamb is vertically true (plumb) (Fig. 5). 1. Identify which way the security door is to open (Fig. 1). PACKAGE CONTENTS A Part Description Quantity A Security Door 1 FIGURE 1 2. Install the lockset (sold separately) with 2-3/8: backset. Then, fully extend the lock bolts into the “locked” position (Fig. 2).
PAGE 2
PUERTAS DE SEGURIDAD INSTRUCCIONES DE ENSAMBLAJE 1. Identifique la dirección en la que se va abrir la puerta de seguridad (Fig. 1). 5. Alinee los orificios del perno de fijación en la jamba del lado del seguro con los pernos de fijación extendidos, asegurándose de que la jamba esté vertical (plomada) (Fig. 5). CONTENIDO DEL PAQUETE A Pieza Descripción Cantidad A Puertas de seguridad 1 FIGURE 1 2. Instale el juego de cerrojos (se vende por separado) con un seguro posterior de 2-3/8 pulg.