PermissionManager (D-9670) User Manual
INSTRUCTION TO THE USER This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a typical installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
1. PermissionManager: The Gatekeeper Systems D-9760 PermissionManager contains two 2.4GHz transceivers and it is used to send commands to and receive data from the Gatekeeper Systems wheels. 2. PermissionManager detail: DIP Switch Screw hole Green LED Connector Block Power up PermissionManager, by providing +3.3V DC power supply at connector block pin 1 and grounding at connector block pin 4. While power up, Green LED will be ON to indicate PermissionManager is power up.
DIP Switch Definition: 10 9 8 DIP Switch Position 7 6 5 4 3 x x x x x x x x x x x x x x x x X X X X x x x x x x x x x x x x x x x x x x x x 0 0 0 0 1 1 1 1 2 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 Definition x x x x x x x x x x x x x x x x power 3, threshold 44 power 4, threshold 44 power 5, threshold 44 power 6, threshold 44 power 7, threshold 44 power 8, threshold 44 power 9, threshold 44 power 10, threshold 44 0 0 1 1 0 1 0 1 10 sec dwell 20 sec dwell 30 sec dwell 60 sec dwell 2 rotations
Contacting Gatekeeper Systems For more information about the PermissionManager and troubleshooting, to order parts or report an issue, contact the Gatekeeper Systems Inc. regional Customer Support office nearest to your location. Hong Kong Gatekeeper Systems (HK), Ltd. Unit 2318~2319, Level 23, Tower 1, Metroplaza NO. 223 Hing Fong Road, Kwai Fong, N.T., HONG KONG (852) 2413 3050 USA Gatekeeper Systems, Inc. 8 Studebaker Irvine, CA 92618 (888) 808-9433 Canada Gatekeeper Systems Canada, Ltd.