User's Manual

Digital Throttle:
The Gatekeeper Systems E7033 Digital Throttle transceiver is designed to be mounted
in the Gatekeeper Systems, Inc. Cart Manager. The Digital Throttle will operate with
Gatekeeper Systems CM Remote, Gatekeeper Systems wheels and responds to
Gatekeeper Systems status requests.
Digital Throttle connectors detail:
Power up Digital Throttle, by providing +12V DC power supply at connector block 1 pin
3 and grounding at connector block 1 pin 4.
While power up, LED bar will be ON to indicate Digital Throttle is in operating mode.
Connector Block 1 Definition:
Pin
Name
Description
1 5V_OUT +5V DC, 0.35A fused Output
2 HORN 6A fused HORN drive
3 12V IN Power Input
4 GND IN Power Grounding
5 RAW 36V Monitor the 36VDC batteries voltage input
6 KEY 36V Monitor a 36V DC Key Input
7 RELAY 36V Monitor the status of the AC relay
8 POT LO Potentiometer low voltage input
Connector Block 1
Connector Block 2