Easy-Fax 90si Secure Facsimile Gateway Reference Guide GateWay GWFS Fax .com Systems, Inc. www. Virginia, USA Toll Free: 1-877-951-9800 Email: help@gwfs.com http://www.gwfs.com Revision 3.
90si Reference Guide CONTENTS 1.0 2.0 3.0 Configuring your STU-III for the 90si 3 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 3 4 5 6 7 8 9 10 AT&T Security Plus AT&T, Lucent and General Dynamics 1100 (*1) AT&T, Lucent, General Dynamics 1900 SDD (*1) GE/RCA 2400 GE 9600 Motorola SECTEL 1000/1500 Motorola SECTEL MMT 1500 L-3 Communications STE 90si Status LED's 11 2.1 2.2 2.3 2.
90si Reference Guide 1.0 Configuring your STU-III for the 90si The most common cause of 90si operational problems are attributed to not having the STU-III's Secure Data port configured for "Synchronous" operation. The following sections provide stepby-step instructions for configuring various secure telephones for "Synchronous" operation as well as setting "speed" and "duplex" to provide optimum performance with the 90si. The "Press" column indicates which button on the secure telephone should be pressed.
90si Reference Guide 1.2 AT&T, Lucent and General Dynamics 1100 Objective: To set Secure Data Mode for 9.6 Kbps, Full Duplex, Synchronous. While On or Off-Hook: Press MENU NEXT SELECT NEXT (until...) SELECT NEXT SELECT MENU Display MAIN MENU / Secure Voice MAIN MENU / Secure Data Ex. SD:9.6 FDX, ASYNC / 2.4 Full Duplex 9.6 Full Duplex Async Sync SD:9.
90si Reference Guide 1.3 AT&T / Lucent / General Dynamics SDD 1900 Objective: To set Secure Data Mode for 9.6 Kbps, Full Duplex, Synchronous, 8 Data Bits. While On or Off-Hook, READY on or off: Press MENU SELECT NEXT (until...) SELECT NEXT SELECT MENU Display MAIN MENU / Secure Data Ex. SD:9.6 H, ASYNC,8 / 2.4 Full Duplex 9.6 Full Duplex Ex. SD:9.6 F, ASYNC,8 / async SD:9.6 F, ASYNC,8 / sync SD:9.
90si Reference Guide 1.4 GE / RCA 2400 Objective: To set Secure Data Mode for 2.4 Kbps, Full Duplex, Synchronous. While On-Hook (to permanently change set-up): Press PROGRAM SET-UP (back of unit) * (YES) # (NO) # # # * * (until...) # PROGRAM * SET-UP (back of unit) Display RCA STU-III Type I Do You Want To Set term Options? Do You Want To Set Standard Options TONE Dialing in ON/OFF Change? Comm.
90si Reference Guide 1.5 GE 9600 Objective: To set Secure Data Mode for 9.6 Kbps, Full Duplex, Synchronous. While On-Hook (to permanently change set-up): Press MENU / DELETE # (NO) * (YES) # # # # * * # * # MENU / DELETE Display GE STU-III Type I (then...) View KSD or ID? Configure Terminal? Control is Local/Change? Dialing Mode/Tone Change? Communication Mode/Full Duplex Change? Initial Voice Rate/Voice = 4800 Change? Ex.
90si Reference Guide 1.6 Motorola SECTEL 1000 / 1500 Objective: To set Secure Data Mode for 2.4/9.6 Kbps, Full Duplex, Synchronous. While Off-Hook and in CLEAR mode: Press PRGM SCROLL (until...) PRGM Display Ex. DATA = 2400 ASYNC DATA = SYNCHRONOUS PRGM (current call status displayed) While On-Hook: Press PRGM SCROLL * SCROLL (until...) # PRGM Display PRGM (enunciator in display) PLEASE WAIT (and then) # for COMSEC * TO SET OPTIONS PRESS SCROLL TO CONTINUE Ex.
0si Reference Guide 1.7 Motorola SECTEL MMT 1500 Objective: To set Secure Data Mode for 9.6 Kbps, Full Duplex, Synchronous. While On-Hook: Press PRGM SCROLL (until...) # SCROLL (until...) # PRGM Display PRGM (enunciator in display) USER OPTIONS # TO SELECT PRESS SCROLL TO CONTINUE Ex. DATA=2400 ASYNC # TO CHANGE DATA=SYNCHRONOUS # TO CHANGE PRGM (current call status displayed) Note: Make sure that "HD" DOES NOT appear in the display. If it does, press the "HALF-DUPLEX" button to make it disappear.
90si Reference Guide 1.8 L-3 Communications STE Objective: To set Secure Data Mode for 9.6 Kbps, Synchronous. For STE’s with software V2.3 or earlier. While On-Hook: Press MODE CHANGE CHANGE SCROLL SCROLL (until...) MODE Display SECURE DATA: A9.6 (Asynchronous, 9.6 Kbps) Secure Data Asynchronous Secure Data Synchronous (Sets Synchronous) Ex. 2.4 Kbps 9.6 Kbps (blank display, standby) For STE’s with software V2.4 and later. While On-Hook: Press MODE SCROLL CHANGE CHANGE CHANGE SCROLL SCROLL (until...
90si Reference Guide 2.0 90si Status LED's There are two LED's located on the front panel of the 90si. The following three sections explain what the various LED states indicate. 2.1 Power-up Note: Before applying power to the 90si, make sure that all cables are securely connected and that your commercial fax device is in Auto-Receive (Fax) mode and answers on 1 or 2 rings. There are a series of LED indications during the 90si power-up sequence.
90si Reference Guide 3.0 Glossary of Secure Facsimile Terms Listed below are definitions of words and terms used in the 90si User's and Reference Guides. Broadcast: A signaling option in the Mil-Std-161 mode in which the transmitting device does not look for any acknowledgements during a fax transmission. Commercial Fax Device: A Commercial-Off-The-Shelf (COTS) "standard" Group III fax machine or computer-based fax device.
90si Reference Guide STU-III: Secure Telephone Unit Generation Three. STU-IIIA: Secure Telephone Unit Generation Three Version A. US Secure telephone that can connect with a STU-IIB. GateWay Fax Systems, Inc., www.gwfs.
