Installation Instructions
1
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING: When using outdoor use portable lighting products, basic safety precautions should
following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
• a) Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuits or outlet to
be used for the outdoor use string light product. Receptacles are available that have built-in GFCI
protection for this measure of safety.
• b) Only use outdoor extension cords such as type SEW, SEOW, SEOOW, SOW, SOOW, STW,
STOW, STOOW, SJEW, SJEOW, SJEOOW, SJW, SJOW, SJOOW, SJTW, SJTOW, or SJTOOW. This
designation is marked on the wire of the extension cord.
• Read and follow all instructions that are on the product or provided with the product.
• This product operates at 12V, 1.5A, 9W per string
• This seasonal use product is not intended for permanent installation or use.
sources of heat.
• Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
• Do not let lamps rest on the supply cord or on any wire.
• Unplug the product when leaving the vicinity of the product or when left unattended.
shock, it should not be played with or placed where small children can reach it.
• Do not use this product for other than its intended use.
• Do not hang ornaments or other objects from cord, wire, or light string.
• Do not close doors or windows on the product or extension cords as this may damage the wire
insulation.
• Do not cover the product with cloth, paper, or any material not part of the product when in use.
• This product is equipped with push-in type lamps.
• Do not operate this product with lamps missing from sockets. Missing lamps should be
replaced promptly.
burns out. Replace lamps only with the spare lamps provided with this product.
• DO NOT EXCEED THE MAXIMUM EXTENSION LENGTH IN FEET PERMITTED BY THE MARKING.
The maximum extension length for this string light is 48 feet or 2 units.
SAVE THESE INSTRUCTIONS
WARNING:
Before beginning assembly, installation, or operation of product, make sure all parts are present. Compare
parts with package and hardware contents lists on page 1. If any part is missing or damaged, do not attempt
to assemble, install or operate the product. Contact customer service for replacement parts.
Tools Required for Assembly (not included): Phillips Screwdriver, Safety Glasses, Ladder, Supporting
hardware (eyebolts or brackets).
Estimated assembly time: 20 minutes
SAFETY INFORMATION
PREPARATION
This product can expose you to chemicals including Lead, which is known to the State of
California to cause Cancer, birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
3.2. Link Smart Life account in Home Control
10
Attention: Due to the Google Home App’s known bug, you could only use one Google account to control
“Home Control Action”. If you sign in Google Home App with several Google accounts, only the first Google
account you signed in can be used for “Home Control”.
1. On the homepage of Google Home App, click the button in the higher left corner, select “+”, select “Set
up device” under the list of “Add and manage”, and then click “Have something already set up”.
2. Find “Smart Life” in the list. In the new window, select your Smart Life account’s region, type your Smart
Life account and password, then tap “Link Now”. After you assign rooms for devices, your devices will
be listed in the Home Control page.
3. Link with Verification Code, open Smart life APP, click “Me–More Services–Google Assistant”.
Quick Guide of Using Google Home to Control Smart Devices
4. Control your smart devices through Google Home
Now you can control your smart devices through Google Home.
p
This product operates at 1
2
V
, 1.5A, 9W per strin
g