Installation Instructions

•
1) The light does not come on at all:
a) Make sure the wall switch and circuit breaker are on.
2) One of the lamps has burned out.
a) Disconnect power to the string light. Remove effected lamp by gently gripping lamp and then turning
in a counter-clockwise direction. Replace lamps only with 12V, 0.75W S14 lamps provided. Align the
groove on the socket with the bolt on the lamp, then gently insert the lamp into the socket. Turn the
lamp in a clockwise direction until fully seated.
3
• When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live
trees in which the needles are brown and break off easily.
• If the product is placed on a tree, the tree should be well secured and stable.
• Before using or reusing, inspect product carefully
. Discard any products that have cut, damaged, or frayed
wire insulation or cords, cracks in the lamp-holders or enclosures, loose connections, or exposed copper wire.
• When storing the product, carefully remove the product from wherever it is placed, including trees, branches,
or bushes in order to avoid any undue strain or stress on the product conductors, connections, and wires.
• When not in use, store neatly in a cool, dry location protected from sunlight.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
FCC WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV techni
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
cian for help.
CARE AND MAINTENANCE
TROUBLESHOOTING
Step 1 Step 2
Tuck in
Rotate
M
8
5. Help improve Google Home and click “YES, I’M IN” in the lower right corner.
6. Choose a location for Google Home, for example, choose “bedroom”.
7. Choose your WI-FI network to set up your Google Home.
8. After successfully connected, the App page will display as f
ollows.
9. Select a language, then click ”Next”.
10. Waiting for the system to set up your Google Assistant auto
matically, click “Next”.
Quick Guide of Using Google Home to Control Smart Devices
Radiation Exposure Statement: To maintain compliance with FCC’s RF Exposure guidelines, This
equipment should be installed and operated with minimum 20cm distance between the radiator and your body:
Use only the supplied antenna.