Quick Start Manual

94
Chapter 4: Installing Components
www.gateway.com
Replacing the processor board
To remove the processor board:
1 Follow the instructions in “Preventing static electricity discharge” on
page 36. Make sure that you turn off the server, then unplug the power
cords and all other cables connected to the server.
2 Remove the top rear panel. For instructions, see “Removing the top rear
panel” on page 41.
3 Remove the inside panel. For instructions, see “Removing the inside panel”
on page 45.
4 Remove the air duct. For instructions, see “Replacing the air duct” on
page 91.
5 Rotate the processor board release levers until they are nearly vertical.
Processor board
release levers