Quick Start Manual

61
Installing fan components
www.gateway.com
5 Lift the fan cage out of the server, then unplug the two cables from the
fan cage.
6 Plug the cables into the new fan cage, then insert the new cage into the
server.
7 Tighten the two captive screws on each end of the fan cage.
8 Reinstall the fan modules.
9 Reinstall the top rear panel.
Replacing the fan cage board
To replace the fan cage board:
1 Follow the instructions in “Preventing static electricity discharge” on
page 36. Make sure that you turn off the server, then unplug the power
cords and all other cables connected to the server.
2 Remove the fan cage from the server. For instructions, see “Replacing the
fan cage” on page 59.