Manualshelf

Quick Start Manual

ManualsBrandsGateway ManualsserversGateway 995
81828384858687888990
76
Chapter 4: Installing Components
www.gateway.com
3 Remove the CD drive from the bracket by pulling the side nearest the screw
hole.
4 Insert the new CD drive onto the bracket so the screw holes on the upper
left edge of the drive line up with the alignment pins on the bracket, then
press the drive down onto the bracket until it snaps into place.
5 Reinstall the media drive bracket into the server. For instructions, see
“Replacing the media drive bracket” on page 74.
Screw hole
Screw hole
Alignment pin