Quick Reference Guide

www.gateway.com
101
Adding or replacing memory
modules
Your convertible notebook uses memory modules called
SO-DIMMs (Small Outline Dual Inline Memory Modules). The
modules are available in various capacities and any module can
be placed in any slot.
To add or replace memory modules:
1 Follow the guidelines under “Preventing static electricity
discharge” on page100.
2 Turn off your convertible notebook.
3 Make sure the LCD panel is in notebook mode, then close
the LCD panel. For more information, see “Converting
from notebook to tablet mode” on page 42.
4 Disconnect from the optional port replicator.
5 Disconnect the AC adapter, modem cable, and network
cable, if they are connected to the convertible notebook.
6 Disconnect all peripheral devices connected to the
convertible notebook and remove any PC cards.
7 Turn your convertible notebook over so the bottom is
facing up, then remove the main and optional multibay
batteries. For more information, see “Changing
batteries” on page 65.
Important
Use only memory modules designed for your Gateway convertible
notebook.
Tools
You need a small Phillips screwdriver to replace memory modules.
Memory bay