Quick Reference Guide

www.gateway.com
87
Adding or replacing memory
modules
Your convertible notebook uses memory modules called
SO-DIMMs (Small Outline Dual Inline Memory Modules). The
modules are available in various capacities and any module
can be placed in any slot.
To add or replace memory modules:
1 Follow the guidelines under “Preventing static
electricity discharge” on page 86.
2 Turn off your convertible notebook.
3 Make sure the LCD panel is in notebook mode, then
close the LCD panel.
4 Unplug the optional port replicator from the convertible
notebook.
5 Disconnect the AC adapter, modem cable, and network
cable if they are connected to the convertible notebook.
6 Disconnect all peripheral devices connected to the
convertible notebook and remove any PC cards.
7 Turn your convertible notebook over so the bottom is
facing up, then remove the main and optional multibay
batteries. For more information, see “Changing
batteries” on page 61.
Important
Use only memory modules designed for your Gateway convertible
notebook.
Tools
You need a small Phillips screwdriver to replace memory modules.
Memory bay